View Larger Image
|
|
MX-3
Ultrasonic Wall Thickness Gauge |
Measuring Range in Steel
1.00 - 150.0 mm
0.040 - 6.00 inches
The Dakota Ultrasonics MX-3 Wall Thickness Gauge accurately measures wall thickness and the extent of corrosion of all metals, ceramics, glass and most rigid plastics - from only one side!
The Dakota Ultrasonics MX-3 can be used in a Scan mode or in a Single Thickness Reading mode, where the probe is dragged over a large measuring area. During the "scan" will be displayed the minimum thickness reading recorded .
The Dakota Ultrasonics MX-3 probe can be submerged in water as it is waterproof. The gauge is impact-resistant and environmentally sealed to provide trouble-free operation under the toughest field conditions.
|
 Simple operator controls virtually eliminate training | | Resolution of 0.001 inch (0.01 mm) | | Large, backlit LCD display retains last reading | | Special-purpose probes are offered for a variety of applications |
| | Switch-selected units for inches or mm | | For underwater surveying, probe cable lengths up to 50 feet are optionally | | Includes NIST Calibration Certificate | | CE Certified |
|
TICC-M
Protective Holder for Ultrasonic Gauges |  |
 Constructed from heavy duty Cordura Nylon
Belt loop included | | | Click image for more info
|
CF12
Coupling Fluid - 355 ml |  |
Used to create an ultrasonic coupling between the probe and material to be measured 355ml (12oz) bottle | | | Click image for more info
|
TI-25-UW-50
50 Foot (15 m) Underwater Probe / Cable Assembly |  |
50 Ft. Length, Waterproof Probe/Cable assembly with non-polarized, Dual-Lemo connectors. | | | Click image for more info
|
TI-SB
Steel Test Block with NIST-Traceable Certificate |  |
Precision Machined and Finished Includes NIST Report and Test Data | | | Click image for more info
|
TI-SB4
Uncertified Steel Test Block |  |
Uncertified Steel Test Block For convenient confirmation of thickness gauge calibration | | | Click image for more info
|
TI-V-BLOCK
Transducer Holder |  |
The V-Block transducer holder offers the operator greater control and repeatabily when measuring on pipes and other curved areas.
For 3/16" & 1/4" Transducers only. | | | Click image for more info
|
| The Dakota Ultrasonics MX-3 is supplied as a complete kit with the gauge, probe, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST Calibration Certificate, and Operating Instruction Manual - all in a foam-fitted carrying case. |  |
 |
Minimum Radius
for Convex Surfaces |
9 mm (0.350") |
| Minimum Radius
for Concave Surfaces |
77 mm (3") |
 |
Minimum Headroom |
26 mm (1") |
 |
Minimum Sample
Diameter |
4 mm (0.150") |
 |
Minimum Substrate Thickness - F |
N/A |
| Minimum Substrate Thickness - NFe |
N/A |
| Range in Steel |
1.00-150.0 mm (0.040-6.00" ) |
| Resolution |
0.01 millimeter
0.001 inch |
| Display |
4½ - Digit, 0.5" Backlit LCD |
| Velocity Range |
2000-10,000 m/sec.(6,500-33,000 ft./sec |
| Probe |
1/4", 5 MHz, actual wearface is 5/8" (17mm) |
| Cable |
1.2 m (4 ft.) waterproof cable with non-polarized, quick-disconnect connectors. Optional lengths up to 15 m (50 ft.). |
| Temp. Limits |
Ambient:- 30 to 50° C (-20 to 120° F)
Material: -20 to 100° C (-0 to 200° F)
Special high temperature probes are optionally available. |
| Battery Type |
Two AA batteries |
| Battery Life |
200 hours |
| Weight |
196 g (7 ounces) |
| Size |
64 x 114 x 32 mm
(2.5 x 4.5 x 1.25") |
| Accessories Included |
Probe/cable assembly. 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case. |
| Warranty |
Gauge: 5 Years
Probes: 90 Days |
All mentioned prices are excluding VAT |
|
