View Larger Image
|
|
TI-CMX
Ultrasonic Coating & Wall Thickness Gauge |
With the CHECKLINE® TI-CMX you can accurately and quickly measure both coating and wall thickness—from only one side. It is also possible to measure and eliminate the coating from the wall thickness measurement by switching the TI-CMX to the Pulse-Echo mode.
This way the user can locate the finest corrosion and pitting—without removing the coating.
The TI-CMX is provided with an oversized graphic LCD which is backlit and displays fonts, graphics and display codes. It also shows all important settings like: Operating Mode, Velocity, Scan Mode, Alarms and other options. The user can set the backlight to the following settings: ON, OFF or AUTO meaning: always-on, always-off or automatically-on when measuring.
The device includes five user-selected operating modes:
Temperature Compensated: Measures wall thickness using Pulse-Echo and automatically adjusts calibration to compensate for changes in material temperature.
Coating On: Measures wall thickness using Pulse-Echo. It separately displays wall & coating thickness.
Coating Off: Measures wall thickness using Pulse-Echo. It displays wall thickness only.
Thru-Coat: Measures wall thickness only using Echo-Echo. (coating is NOT included)
Coating Only: Measures coating thickness only.
Try the TI-CMX yourself!
Click here for our TI-CMX Demo
|
 Wide variety of dual-element probes can be used for nearly any application. | | Bar graph with user-set start end values providing highest resolution around the target thickness value. | | Measures both thickness of coatings and paint layers, as well as wall thickness (in one measurement) | | Adjustable Gain in 5 steps (VLow, Low, Med, Hi & VHi) in 2db increments providing a 8 db gain adjust range (42–50 db). | | Includes NIST-Traceable Calibration. | | Auto probe recognition with Auto Zero or Manual Zero. |
| | Differential Mode allows user to set a "target thickness value" and display will show the DIFFERENCE between actual and target thickness as a plus or minus value. | | 64 custom setups can be stored and retrieved for convenient use and labeled for easy identification | | Display Hi/Lo Alarm Limits with audible and visual indicators. | | Metal housing provides strong protection against harsh enviroments. | | CE Certified. | | 2 Year Warranty. |
|
|
Hi-Speed Scan Mode |
B-Scan Mode |
 |
 |
| Scan Mode measures 64
times per second, displaying the max and min reading measured during the
scan interval. Sample rate is 200/sec when coating measurement is off. |
The B-Scan displays a
time based cross section view of test material of the contour of the
blind, or underside of a pipe or tank application. the B-Scan view draws
at a rate of seven seconds per screen from right to left. |
|
| TI-SB | Precision Machined and Finished Includes NIST Report and Test Data |  | | | Click image for more details
|
| TI-SB4 | Uncertified Steel Test Block For convenient confirmation of thickness gauge calibration |  | | | Click image for more details
|
| TICC-MVX | Constructed from heavy duty Cordura Nylon Built-in belt loop Includes wrist & shoulder straps |  | | | Click image for more details
|
| CF12 | Used to create an ultrasonic coupling between the probe and material to be measured 355ml bottle |  | | | Click image for more details
|
| CF2H | Temperature Range:
0° to 600° F
-18° to 315° C Supplied in 60ml (2oz) tube |  | | | Click image for more details
|
| TI-V-BLOCK | The V-Block transducer holder offers the operator greater control and repeatabily when measuring on pipes and other curved areas.
For 3/16" & 1/4" Transducers only. |  | | | Click image for more details
|
| TI-DIN-CAL | Calibration Certificate DIN 55 350 Part 18, § 4.22, DIN ISO 8402 Part 1 |  | | | Click image for more details
|
| N-306-0010 | RS232 (DB-9 to Lemo) Data Cable 182cm |  | | | Click image for more details
|
| TI-CMX-UW-50 | 50 Ft. Length, Waterproof Probe/Cable assembly with non-polarized, Dual-Lemo connectors. 1/2", 5 MHz Probe for wide variety of steel, stainless steel, aluminum and similar applications. |  | | | Click image for more details
|
|
 |
Minimum Radius
for Convex Surfaces |
8.89 mm |
| Minimum Radius
for Concave Surfaces |
76.2 mm |
 |
Minimum Headroom |
25.4 mm |
 |
Minimum Sample
Diameter |
3.8 mm |
 |
Minimum Substrate Thickness - F |
NA |
| Minimum Substrate Thickness - NFe |
NA |
| Range in Steel: |
Pulse-Echo Mode: Pit and Flaw detection measures from 0.025 - 9.999inches (0.63 to 254 millimeters)
Echo-Echo Mode: Thru Paint & coatings measures from 0.1 - 4.0 inches (2.54 to 102 mm).
Range will vary +/- depending on the thickness of the coating. |
| Max Coating: |
0.100" |
| Resolution: |
.001 inches (0.01mm) |
| Velocity Range: |
.0492 to .3936 in./ms
1250 to 9999 meters/sec |
| Units: |
Inch or mm |
| Measurement Modes: |
- Pulse-Echo (corrosion mode)
- Pulse-Echo Coating (Corrosion w/o coating)
- Echo-Echo (thru-paint)
- Temp Comp (auto adjust for material temp)
- Coating Only (Ultrasonic Coating Gauge) |
| Transducer Types: |
Dual Element (1 to 10 MHz). |
| Output: |
RS-232 for upload/download of setups |
| Memory capacity: |
TI-CMX: None
CMXDL model: over 200.000 measurements |
| Power Source: |
Three 1.5V alkaline or 1.2V NiCad AA cells |
| Battery Life: |
Typically operates for 150 hours on alkaline and 100 hours on NiCad |
| Auto Power off: |
After 5 minutes of non-use |
| Display: |
1/8 in. VGA grayscale display 62 x 45.7mm |
| Keyboard: |
Membrane switch with twelve tactile keys |
| Case: |
Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed). |
| Operating Temperature: |
-10° to 60°C (-14° to 140°F) |
| Weight, net: |
383 grams |
| Dimensions: |
63.5 W x 165 H x 31.5 D mm |
| Warranty: |
2 year limited |
| Certification: |
CE Approved, Factory calibration traceable to national standards |
The TI-CMX is supplied as a complete kit including:
- the TI-CMX gauge,
- probe,
- 4 oz. bottle of coupling fluid,
- 2 AA batteries,
- NIST Calibration Certificate,
- operating manual,
- RS-232 cable,
- data transfer software,
- foam-fitted carrying case.
|  |
| item |
Price |
Description |
In Cart |
 |
| Product(s) |
| TI-CMX |
€1595.00 |
TI-CMX Combination Coating & Wall Thickness Gauge | | |
| TI-CMX-H |
€1695.00 |
TI-CMX Coating & Wall Thickness Gauge with High Temp Transducer, up to 150°C | | |
| TI-CMX-2225 |
€1595.00 |
TI-CMX Coating-Wall Thickness Gauge + 1/4" 2.25MHz Transducer for thin plastics | | |
| Accessories |
| TICC-MVX |
€85.00 |
Protective Holder for TI-CMX | | |
| CF-12 |
€20.00 |
Coupling Fluid - 12oz | | |
| V-Block |
€175.00 |
V-Block Transducer Holder | | |
| TI-CMX-UW-50 |
€525.00 |
Underwater Probe with 50 ft (15 m) cable | | |
| CF-2H |
€20.00 |
Coupling Fluid for High Temperature (315 °C) 60 ml | | |
| Calibration Certificate |
€99.00 |
Calibration Inspection Certificate | | |
| N-306-0010 |
€120.00 |
RS232 Data Cable 182cm | | |
| TI-SB4 |
€105.00 |
Uncertified Steel Testblock | | |
| TI-SB-4H |
€295.00 |
Steel Test Block | | |
| TI-SB-4L |
€395.00 |
Steel Test Block | | |
| TI-SB-5L |
€295.00 |
Certified Steel Test Step Block | | |
| T-101-2900 |
€310.00 |
3/16" dia 5.0 MHz Transducer | | |
| T-101-3900 |
€310.00 |
3/16"-7.5MHz Coating Transducer | | |
| T-102-2900 |
€275.00 |
1/4" dia 5.0 MHz Replacement Transducer for TI-CMX | | |
| T-102-2900-6A |
€370.00 |
CMX Coating Transducer with 6 Ft armored cable | | |
| T-102-2900-H |
€295.00 |
High Temperature CMX Probe 1/4" 5 MHz 170 Celsius | | |
| T-104-2900 |
€275.00 |
1/2" dia 5.0 MHz Heavy Wall Transducer for TI-CMX | | |
| T-104-9900 |
€290.00 |
1/2" dia 3.5 MHz Cast Iron & Plastics Transducer for TI-CMX | | | | |
All mentioned prices are excluding VAT |
|
Downloads
