View Larger Image
|
|
TI-25P
Programmable Ultrasonic Wall Thickness Gauge |
Measuring Range in Steel
1.00 - 150.0 mm
0.040 - 6.000 inches
With the CHECK-LINE TI-25P Wall Thickness Gauge you can measure accurately the thickness of walls and the extent of corrosion from only one side!
When only one material is being tested then the TI-25P is the perfect choice because it holds a single ultrasonic velocity. You can start working right away because the velocity has been preset in the gauge.
The TI-25P has a Standard configuration: It is factory set to measure steel.
Additionally we offer the possibility to program the TI-25P to measure any other single material instead of steel. To be able to perform this optional configuration: Checkline Europe needs a sample of the material to be measured or the exact sound velocity of the material must be known.
|
 Switch-selected units for inches or mm | | Resolution of 0.01 mm (0.001 inch) | | The gauge is impact-resistant and environmentally sealed to provide trouble-free operation under the toughest field conditions | | Special-purpose probes are offered for a variety of applications |
| | The TI-25P probe is waterproof and can be submerged in water | | Large, backlit LCD display retains last reading | | For underwater surveying, probe cable lengths up to 15 meter are optionally | | Comes complete with cable and software to transfer the velocity to the gauge. |
|
| TI-SB | Precision Machined and Finished Includes NIST Report and Test Data |  | | | Click image for more details
|
| TI-SB4 | Uncertified Steel Test Block For convenient confirmation of thickness gauge calibration |  | | | Click image for more details
|
| TICC-M | Constructed from heavy duty Cordura Nylon Belt loop included Includes wrist & shoulder straps |  | | | Click image for more details
|
| CF12 | Used to create an ultrasonic coupling between the probe and material to be measured 355ml (12oz) bottle |  | | | Click image for more details
|
| TI-DIN-CAL | Calibration Certificate DIN 55 350 Part 18, § 4.22, DIN ISO 8402 Part 1 |  | | | Click image for more details
|
| TI-25-UW-50 | 50 Ft. Length, Waterproof Probe/Cable assembly with non-polarized, Dual-Lemo connectors. 1/2", 5 MHz Probe for wide variety of steel, stainless steel, aluminum and similar applications. |  | | | Click image for more details
|
| TI-V-BLOCK | The V-Block transducer holder offers the operator greater control and repeatabily when measuring on pipes and other curved areas.
For 3/16" & 1/4" Transducers only. |  | | | Click image for more details
|
| N-306-0010 | RS232 (DB-9 to Lemo) Data Cable 182cm |  | | | Click image for more details
|
|
 |
Minimum Radius
for Convex Surfaces |
8.89 mm |
| Minimum Radius
for Concave Surfaces |
76.2 mm |
 |
Minimum Headroom |
25.4 mm |
 |
Minimum Sample
Diameter |
3.8 mm |
 |
Minimum Substrate Thickness - F |
NA |
| Minimum Substrate Thickness - NFe |
NA |
| Range in Steel |
1.00-150.0 mm (0.040-6.000") with supplied probe. Other probes available. |
| Resolution |
0.01 millimeter (0.001 inch) |
| Display |
4½ - Digit, 0.5" Backlit LCD |
| Velocity Range |
1250 to 10.000 meters/sec (.0492 to .3937 in/µs) |
| Probe |
1/4", 5 MHz, actual wearface is 17mm (5/8") |
| Probe Wearface |
PEEK (Polyethylethylkytone) |
| Cable |
1.2m (4ft.) waterproof cable with non-polarized, quick-disconnect connectors |
| Temp. Limits |
Ambient: -30 to 50° C (-20 to 120° F)
Material: -20 to 100° C (0 to 200° F)
Special high temperature probes are optionally available |
| Battery Type |
Two AA batteries |
| Battery Life |
200 hours |
| Weight |
280 g (710 ounces) |
| Dimensions |
64 x 114 x 32mm (2.5 x 4.5 x 1.25") |
| Software |
Comes complete with cable and software to transfer the velocity to the gauge. |
| Warranty |
Gauge: 5 Years
Probes: 90 Days |
| Accessories |
Probe/cable assembly, 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case. |
The TI-25P is supplied as a complete kit with the gauge, probe, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST Calibration Certificate, and Operating Instruction Manual - all in a foam-fitted carrying case.
For setting the ultrasonic velocity, a connection cable and software are supplied |  |
| item |
Price |
Description |
In Cart |
 |
| Product(s) |
| TI-25P |
€915.00 |
TI-25P Complete Kit | | |
| Accessories |
| TICC-M |
€70.00 |
Protective holder | | |
| CF12 |
€20.00 |
Coupling Fluid - 355ml. | | |
| V-Block |
€175.00 |
V-Block Transducer holder | | |
| Calibration Certificate |
€99.00 |
Calibration Inspection Certificate | | |
| T-102-2000 |
€245.00 |
5 MHz Probe1/4" | | |
| TI-25-UW-50 |
€525.00 |
15m Underwater Probe / Cable assembly | | |
| N-306-0010 |
€120.00 |
RS232 Data Cable 182cm | | |
| TI-SB4 |
€105.00 |
Uncertified Steel Testblock | | |
| TI-SB-4H |
€295.00 |
Steel Test Block | | |
| TI-SB-4L |
€395.00 |
Steel Test Block | | |
| TI-SB-5L |
€295.00 |
Certified Steel Test Step Block | | | | |
All mentioned prices are excluding VAT |
|
Downloads
