View Larger Image
|
|
NE131
Electronic preselection counter with one or two presets |
IVO multifunctional counter with one or two presets. Can be used in a wide variety of applications.
Timer with four different time ranges, time relay function with pickup and dropout delay.
Start value can be programmed. Also the scaling factor can be programmed.
Block diagram
Pin assignment (With relay output) |
 Pulse counter, time counter with
or without totalizer | | Count and Reset for voltage pulse
12...260 VAC/VDC
55 min. | | Adding or Substracting mode |
| | Actual value and preset value are
displayed at the same time | | Scaling factor can be programmed
0.0001...9999.99 |
|
Optional available for counter NE131:
Z 118.033 Adapter plate for screw fixture
Z 118.034 Adapter plate for clamping bracket fixture
Z 118.035 Adapter plate for clamping bracket fixture with large front plate
See below for dimensions...
 |
| Mechanical Data |
|
| Display: |
LCD-display with 2 rows of digits
Background illumination
6-digit displ. of real value, 7 mm high
6-digit displ. of pre. value, 4 mm high
Decimal point can be programmed
Suppression of leading zero
Measurement units can be progr. in m, dm, cm, mm, l, h, min, s |
| Operation, keypad: |
Front membr. with short-stroke keys |
| Front dimensions: |
DIN housing 48 x 48 mm |
| Mounting: |
Front installation |
| Fastening: |
Clamping frame |
| Weight: |
Ca. 140 g |
| Type of connection: |
Plug-in screw terminals
Grid 5.08 mm |
| Core cross-section: |
Max. 1.5 mm2 |
| Housing material: |
Polycarbonate black, UL 94V-0 |
| Membrane material: |
Polyester |
Ambient conditions |
|
| Ambient temperature: |
0...+50 °C |
| Storage temperature: |
-20...+70 °C |
| Relative humidity: |
Max. relative humidity 80 %, at 25 °C, non-condensing |
| Protection: |
Front IP 65 to DIN 40050 |
| General rating: |
EN 61010 Part 1
- Protection class II
- Overvoltage protection categ. II
- Contamination factor 2 |
| Interference immunity: |
EN 61000-6-2 |
| Emitted interference: |
EN 50081-2 |
Electrical data |
|
| Supply voltage: |
85...265 VAC (50 / 60 Hz)
10...30 VAC/VDC (50 / 60 Hz) |
| Power consumption: |
1,5 VA (2 W) |
| Signal inputs: |
12...260 VAC/VDC |
| Counting rate: |
25 Hz, (1 kHz for DC triggering) |
| Signal outputs: |
Can be programmed as momentary or permanent signals
Impulse time can be programmed 0.01...99.99 s |
| Relay signal outputs: |
1 or 2 floating relays to be programmed as normally open or normally closed contact
Max. switch. voltage 260 VAC
Max. switch. power 1 A
Max. switch. capacity 150 VA /30 W
Response time ca. 5 ms |
| Reset: |
With or without automatically reset |
| Data storage: |
> 10 years via EEPROM |
| Operation modes: |
To be programmed as adding or subtracting |
Your selection: NE131.0
| item |
Price |
Description |
In Cart |
 |
| Product(s) |
| NE131.012AX01 | €238.00 | NE131.012AX01 Multifunctional Counter | | |
| NE131.013AX01 | €238.00 | NE131.013AX01 Multifunctional Counter | | |
| NE131.022AX01 | €195.00 | NE131.022AX01 Multifunctional Counter | | | | |
All mentioned prices are excluding VAT
| If the desired model is not shown in the list of prices, price is on request |
|
|
