View Larger Image
|
|
NE215
Multifunctional Counter with 2 presets and Preliminary testing by PTB |
IVO multifunctional counter with two presets. Can be used in a wide variety of applications. Can be programmed as preselection counter, time counter, totalizer.
Block diagram
Pin assignment |
 Main counter with two presets | | Batch counter with preset value and multiplier (1...999) |
| | Models with scaling factor 0.0001...99.9999 | | Interface RS232, RS485 |
|
Suitable encoder and printer Preliminary testing PTB
Suitable encoder PTB GPI0W-Series
Suitable slip printer Star SP298
Suitable Encoder Models:
GPI0W.5102239 50 pul./rev., synchro fl. M4, cable 2 m radial
GPI0W.0101215 500 pul./rev., clamp. fl. M3, cable 2 m axial
GPI0W.1101439 50 pul./rev., clamp. fl. M4, cable 5 m axial
GPI0W.1101415 500 pul./rev., clamp. fl. M4, cable 5 m axial
GPI0W.1101639 50 pul./rev., clamp. fl. M4, cable 10 m axial
GPI0W.1101615 500 pul./rev., clamp. fl. M4, cable 10 m axial
|
| Display: |
7-segment LED-display
8-digit display of real value,
7.6 mm high
minus sign for negative values |
| Operation, keypad: |
Front membrane w. short-stroke keys |
| Front dimensions: |
DIN housing, 72 x 72 mm |
| Mounting: |
Front installation |
| Fastening: |
Clamping frame |
| Weight: |
Version AC: ca. 450 g
Version DC: ca. 320 g |
| Type of connection: |
Plug-in screw terminals
Grid 5.08 mm / 3.81 mm |
| Core cross-section: |
Max. 1.5 mm2 |
| Housing material: |
Polycarbonate black, UL 94V-0 |
| Membrane material: |
Polyester |
| Supply voltage: |
Choice of two voltages via switch on device. When supplied, always higher voltage adjusted.
115 / 230 VAC ±10 % (50 / 60 Hz)
24 VDC ±10 %, 5 % residual ripple |
| Power consumption: |
7 VA, 6 W |
| Sensor supply: |
12...26 VDC / max. 80 mA |
| Signal inputs: |
Optocoupler
PNP, NPN
Input resistance 1.65 kOhm
Control current 9...16 mA |
| Input counting rate: |
Max. 10 kHz |
| Control inputs: |
1 control input for XP reset
1 control input for B1 reset |
| Signal outputs: |
Can be programmed as momentary or permanent signal
Impulse time can be programmed 0.01...9.99 s, tolerance: +0,01 s |
| Relay signal outputs: |
3 floating center-zero relays
Internal spark suppression
Max. switch. voltage 250 VAC
Max. switch. power 1 A
Max. switch. capacity 150 VA / 30 W |
| Data storage: |
> 10 years via EEPROM |
| Counting mode of signal inputs A / B: |
A 90° B x1 |
| Ambient temperature: |
0...+50 °C |
| Storage temperature: |
-20...+70 °C |
| Relative humidity: |
Max. relative humidity 80 %, at 25 °C, non-condensing |
| Protection: |
Front IP 65 to DIN 40050 |
| General rating: |
EN 61010 Part 1
- Protection class II
- Overvoltage protection categ. II
- Contamination factor 2 |
| Interference immunity: |
EN 50082-2 |
| Emitted interference: |
EN 50081-1 |
Your selection: NE215.
| item |
Price |
Description |
In Cart |
 |
| Product(s) |
| NE215.012AX01 | €695.00 | NE215.012AX01 Multifunctional Counter | | |
| NE215.012AX05 | €695.00 | NE215.012AX05 Multifunctional Counter | | | | |
All mentioned prices are excluding VAT
| If the desired model is not shown in the list of prices, price is on request |
|
|
