View Larger Image
|
|
MX-275
Motorized Vertical Test Stand |
Capacity: 275 lbs / 125 Kg / 1225 N
The new MX-275 motorized test stands offer advanced force testing. The combination of screw drive system and state-of-the-art brushless motor provides extremely smooth and powerful operation over the entire speed range.
Connect the MX-275 test stand with a Z Series force gauge (Z2 or ZP Series), and enable force controlled testing.
High/Low Set Point Force Control
Force control is activated when the applied force is at or between the high and low set point(s) of the force gauge and is deactivated by the digital timer. Initial carriage speed is controlled by the variable or fixed speed settings.
One Way Force Control
Initial carriage speed is controlled by the variable or fixed speed settings. When the applied force reaches the low set point of the Z Series force gauge, the test stand’s carriage speed is adjusted to 20% of maximum and decreases to zero as the applied force reaches the high set point. This makes the MX-275 ideal for non-destructive testing.
Speed control, quick switch and emergency stop are standard features. Optional timer and digital distance meter are available.
*FORCE GAUGE NOT INCLUDED
Designed to work with the Z2 & ZP force gauges.
|
 One stand for both compression (push) and tension (pull) tests | | Jog, Single Cycle, Continuous Cycle (72 hour max.), Force Control | | Clearance 16" | | Force Controlled operation with ZP & Z2 Series force gauges |
| | Combination of screw drive system and high performance brushless motor provides extremely smooth and powerful operation over the entire speed range. | | Wide speed range: 0.4 – 9.4 in/min (optional speed ranges available) | | Optional timer and digital distance meter |
|
ZP
Digital Force Gauge with USB Output |  |
 Overload protection 200 % full scale
For hand-held use or mounting on test stands USB, RS-232C, and Analog outputs | | | Click image for more info
|
Z2
Digital Force Gauge |  |
Output signals
(RS 232 C, analog and Mitutoyo Digimatic) | | | Click image for more info
|
SW-1
Data Acquisition Software for Force Gauges & Torque Gauges |  |
Full SPC and graphing capabilities Automates your data collection Provides a running log of all measurements along with a chart of the data as well as statistical information | | | Click image for more info
|
LP-99
Lexan Safety Shield |  |
Helps protect personnel from injury by containing debris during testing | | | Click image for more info
|
| Capacity |
275 lbs / 125 Kg |
| Travel Rate |
0.4 – 9.4 in/min |
| Dimensions |
Refer to Dimension above |
| Compatible Gauges |
ZP, Z2 and DS2 |
| Warranty |
2 years |
| *Note |
Optional Distance Meter Max Sampling Rate Output - 2 Samples Per Second |
| item |
Price |
Description |
In Cart |
 |
| Product(s) |
| MX-275 | €3745.00 | Motorized Vertical Test Stand | | |
| MX-275S | €4425.00 | Motorized Vertical Test Stand with Distance Meter | | | | |
All mentioned prices are excluding VAT |
|
