View Larger Image
|
|
TSFM500-DC
Advanced High Capactiy Motorized Test Stand |
The TSFM500-DC Advanced Motorized Force Measurement Test Stand offers all the mechanical specifications of the TSFM motorized test stand, including 500 lb (2200 N) force capacity, generous clearance and throat depth, rugged design, and more, stepper motor design that prevents speed variation with load, and more.
The TSFM500-DC offers expanded capabilities, including PC control, programmable cycling, auto return, and other features. |
 Loading table with 25 #10-32 UNF holes for fixture mounting | | Available in vertical and horizontal orientations. |
| | Supplied with four hooks (small, medium, large, and extra large), 1/2-20F adapter plate, 2" and 3" compression plates, two couplers (#10-32 coupler and 5/16-18), and wrench set. |
|
- Computer Control
A bi-directional RS-232 port is provided to interface with a PC. For full control from a PC a command set is provided.
The following additional items are required for PC control:
- Model BGI force/torque gauge (more info)
- 09-1056 serial cable
- 09-1143 multi-function cable
- Overload Protection
Protects a force gauge against overload (requires a Series BG force gauge and 09-1143 multi-function cable). The user programs the desired percentage of full scale of the gauge. Adjustable analog output voltage setting allows the test stand to interface with virtually any force gauge with analog output.
- Auto-return
The crosshead moves to a limit switch or force set point (requires a Series BG force gauge), stops, and reverses direction at maximum speed to the other limit switch or set point.
- Overload Protection
Protects the torque sensor against overload (requires a Model BGI force/torque gauge and 09-1143 multi-function cable). The desired percentage of full scale of the sensor can be user-programmed.
- Cycling / Dwell Time
The crosshead moves up and down between limit switches or force set points (requires a Series BG force gauge). Configurable up to 99,999 cycles. Dwell time allows the operator to program the amount of time, up to 9,999.9 seconds, in 0.1 second intervals, for which the crosshead pauses at limits.
- Programmable LEFT / RIGHT Button Functions
LEFT and RIGHT button operation can be configured in three user-configurable modes: Maintained: a short push produces continuous motion until STOP is pressed, Momentary: crosshead moves only while the button is pressed, and Auto: short push produces maintained motion, while holding down the button will produce momentary motion.
- Independent Left and Right Speeds
Programmable independent speeds for left and right directions
- Selectable speed units of measurement (in/min & mm/min)
- Password protection
Prevents unauthorized changes to test parameters.
* Contains no integrated travel measurement. Travel information available only through the external ESMH001 digital travel display, requiring an additional serial port on the PC. For an integrated solution with full PC control, including travel distance, see test stand model ESM301.
|
| Capacity |
500lbs (2.2Kn) |
| Stroke |
4.00" (102 mm) |
| Speed Range |
0.01 - 6 in/min (0.2 - 150 mm/min] |
| Dimensions |
Refer to dimensions above |
| Weight |
25 lbs (11.4 kg) |
| Compatible Gauges |
MG, BG and CG |
| Warranty |
3 years |
| item |
Price |
Description |
In Cart |
 |
| Product(s) |
| TSFM500-DC | €3115.00 | Vertical Advanced Motorized Test Stand | | |
| Accessories |
| TSF001 | €655.00 | Digital travel display for TSF-Series stands | | |
| TSFM002 | €385.00 | Limit switch kit for TSFM500(-DC)/TSFM500H(-DC) | | |
| TSF002 | €230.00 | Horizontal/wall mounting kit for TSF-Series and TST-Series stands | | | | |
All mentioned prices are excluding VAT |
|
