View Larger Image
|
|
TI-25LT
Low Cost, Ultrasonic Wall Thickness Gauge |
Measuring Range
0.040 - 6.00 inches
1.00 - 150.0 mm
The TI-25LT Wall Thickness Gauge accurately measures wall thickness and the extent-- from only one side!
Standard configuration: In its standard configuration, the TI-25LT is factory set to measure steel only.
Optional configuration: As a "no cost" option, the TI-25LT can be factory set to measure on any other single material instead of steel.
Easy upgrade to full TI-25M functionality (refer to separate data sheet). TI-25M measures on all metals, ceramics, glass and most rigid plastics. It provides Single Reading and Scan modes, where the probe is dragged over a large measuring area. The minimum reading recorded during the "scan" is displayed.
Upgrade to TI-25M requires factory installation of enhanced circuit board, new firmware and keypad.
 |
 Resolution of 0.004 inch (0.04 mm) | | The TI-25LT probe is waterproof and can be submerged in water | | Special-purpose probes are offered for a variety of applications | | Large, backlit LCD display retains last reading |
| | Switch-selected units for inches or mm | | The gauge is impact-resistant and environmentally sealed to provide trouble-free operation under the toughest field conditions | | For underwater surveying, probe cable lengths up to 50 feet are optionally |
|
| Complete Kit includes: Gauge, probe, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST Calibration Certificate and Operating Instruction Manual - all in a foam-fitted carrying case. |  |
| TI-SB | Precision Machined and Finished Includes NIST Report and Test Data |  | | | Click image for more details
|
| TICC-M | Constructed from heavy duty Cordura Nylon Belt loop included Includes wrist & shoulder straps |  | | | Click image for more details
|
| CF12 | Used to create an ultrasonic coupling between the probe and material to be measured 355ml (12oz) bottle |  | | | Click image for more details
|
| TI-DIN-CAL | Calibration Certificate DIN 55 350 Part 18, § 4.22, DIN ISO 8402 Part 1 |  | | | Click image for more details
|
| TI-25-UW-50 | 50 Ft. Length, Waterproof Probe/Cable assembly with non-polarized, Dual-Lemo connectors. 1/2", 5 MHz Probe for wide variety of steel, stainless steel, aluminum and similar applications. |  | | | Click image for more details
|
| TI-V-BLOCK | The V-Block transducer holder offers the operator greater control and repeatabily when measuring on pipes and other curved areas.
For 3/16" & 1/4" Transducers only. |  | | | Click image for more details
|
|
 |
| Range in Steel |
0.040-6.00" (1.00-150.0 mm) |
| Resolution |
.004" (0.01mm) |
| Display |
4½ - Digit, 0.5" Backlit LCD |
| Velocity Range |
.0787-.3937 in/µs
(2000-10,000 m/sec) |
| Probe |
1/4", 5 MHz, actual wearface is 5/8" (17mm) |
| Probe Wearface |
PEEK (Polyethylethylkytone) |
| Cable |
4ft. (1.2m) waterproof cable with non-polarized, quick-disconnect connectors. Op |
| Temp. Limits |
Ambient: -20 to 120° F (-30 to 50° C)
Material: 0 to 200° F (-20 to 100° C) Special high temperature probes are optionally available |
| Battery Type |
Two AA batteries |
| Battery Life |
200 hours |
| Weight |
710 ounces (280g) |
| Dimensions |
2.5 x 4..5 x 1.25"
(64 x 114 x 32mm) |
| Accessories |
Probe/cable assembly, 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case. |
| Warranty |
Gauge: 5 Years
Probes: 90 Days |
| item |
Price |
Description |
In Cart |
 |
| Product(s) |
| TI-25LT | €740.00 | TI-25LT Complete kit | | |
| Accessories |
| TICC-M | €50.00 | Protective holder | | |
| CF-AN | €9.00 | Coupling Fluid - 200ml | | |
| Calibration Certificate | €99.00 | Calibration Certificate | | | | |
All mentioned prices are excluding VAT
|
|
Page executed in 1.7645 seconds
|
Downloads
