View Larger Image
|
|
DID-4
Digital Torque Screwdriver |
The DID-4 torque screwdriver features an integral/adjustable LCD display for convenient torque readings. The unit is designed for screw tightening torque verification and measures in Peak, Real Time, and Peak Down measuring modes (selectable).
The DID-4 torque screwdriver has an accuracy of ± 0.5% F.S., ±1 LSD and has programmable setpoints that provide both an audible beep and green/red LED indicator for uniform tightening or GO/NO GO testing. In addition, it features a programmable counter that minimizes assembly errors by identifying mis-tightening and/or defective screws. Use the 800 internal memory for peak data recall or RS-232 download for SPC.
The DID-4 torque screwdriver substantially reduces scrap and rework costs by eliminating over and under-tightening and is ideal for use in a wide variety of applications including the manufacture of electronic, appliance and aerospace assemblies.
NOTE: The DID-4 Torque Screw Driver is not CE certified
|
 Ergonomic and light weight, yet ruggedly constructed | | Peak, Real Time and Peak Down measuring mode (selectable) | | Programmable High and Low setpoints with both audible beep and Green/Red LED indicator for uniform torque tightening or GO/NO GO testing | | Programmable screw tightening counter | | Both CW and CCW ratchett and fixed operation | | Statistics: number of data, Max, Min, Avg | | Selectable units ozf-in, lbf-in, kgf-cm, N-cm and N-m |
| | 800 data memory for recall or for SPC download | | Programmable Auto Zero function resets unit to zero for easy operation | | Runs on internal NiCad batteries (for 8 hours) Auto shut-off after 10 min. of non-use | | USB data output for SPC capability | | 1/4" Phillips tips, AC charger and carrying case included | | 2-Year Warranty |
|
| Model |
Ranges | Resolution |
| DID-4-E |
560.0 in-oz | 0.1 in-oz |
|
35.00 in-lb | 0.01 in-lb |
|
40.00 kg-cm | 0.01 Kg-cm |
|
400.0 N-cm | 0.1 N-cm |
|
4.000 N-m | 0.001 N-m | | |
| Model DID-4 is sold in kits which includes the tester/screwdriver, 1/4" Phillips tips, Universal (100-240V) AC adapter/charger and carrying case. |  |
| Capacity |
560.0 in-oz
35.00 in-lb
40.00 kg-cm
400.0 N-cm
4.000 N-m |
| Accuracy |
+/- 0.5% F.S., +/- 1 LSD |
| Display |
4 digit LCD |
| Operation |
CW, CCW and fixed position |
| Measuring Modes |
|
| PP |
Peak Mode displays PEAK torque value that will not change until a higher value is measured |
| PD |
Peak Down Mode Captures first peak down value above the PDLO |
| Real Time |
Displays transient torque values |
| C |
Real-time Output 180 data per second |
| GO/NO GO testing |
Programmable High and Low setpoints with both audible beep and Green/Red LED indicator |
| Statistics |
Number of data, maximum, minimum and average |
| Data Transfer |
ASCII, 19200 bps, USB miniB cable |
| Data Memory |
800 data |
| Batch Counter |
1-99 (CW only) |
| Power Supply |
Ni-Cad rechargeable batteries 1.2V×4cells 600mAh |
| Auto Power Save |
Automatic switch off after 10 minutes of non-use |
| Charging Time |
From empty - less than 5hours |
| Working Time |
12 hours continuous use |
| Bit Size |
6.35 mm |
| Weight |
430g |
| Accessories |
AC/DC Adapter/Charger, 100~230VAC, 2 Phillips bits, NIST certificate |
SW-1
Data Acquisition Software for Force Gauges & Torque Gauges |  |
 Full SPC and graphing capabilities
Automates your data collection Provides a running log of all measurements along with a chart of the data as well as statistical information | | | Click image for more info
|
DIS-RL
Digital Torque Screw Driver |  |
Peak, Real Time and Peak Down measuring mode (selectable) | | | Click image for more info
|
MGT
Digital Torque Gauge |  |
Remote sensor | | | Click image for more info
|
HTG2
Digital Torque Gauge with programmable setpoints |  |
Two selectable modes:
Real time: To display load transients
Peak Modes: To capture the peak force achieved during test | | | Click image for more info
|
| item |
Price |
Description |
In Cart |
 |
| Product(s) |
| DID-4E | €760.00 | DID-4 Torque Screwdriver | | |
| Accessories |
| SW-1SV-USB | €190.00 | Data Acquisition Software | | |
| CB-205 | €70.00 | RS232 Serial Output Cable | | |
| ISO-17025 | €155.00 | ISO/IEC 17025 Certificate & Test Data In Stock | | |
| CB-209 | €25.00 | CB-209 USB Data Output Cable (for DID, DIW) | | | | |
All mentioned prices are excluding VAT |
|
