View Larger Image
|
|
DXV
Tension meter with measuring head rotated by 90º |
This special design provides easier reading when the standard design makes dial reading difficult.
The measuring head is rotated bij 90º for this purpose.
Note: This model does not include a material thickness compensator |
 Provides easier reading when the Model DXE makes dial reading difficult | | Special finger support
located on the rear side
reduces the effort to move
the outer roller assembly | | Built-in mounting holes permit fixed installation for continuous tension measurement
| | Each instrument is individually calibrated for highest accuracy | | Rugged aluminium housing |
| | Small, ball-bearing mounted, V-grooved guide rollers | | Filament guide and roller shifting mechanism ensure easy acquisition of the running material | Everything in operator's view:
- the guide rollers
- the measured material
- the readings | | 41mm Ø scale | | Specific Test Report with calibration report optionally available |
|
| Model |
Ranges | Measuring Head Width X* approx. mm | Measuring Head Length Y approx. mm | SCHMIDT Calibration Material** |
| DXV-50 |
10-50 | 38 | 38 | PA: 0.12 mm Ø |
| DXV-120 |
20-120 | 38 | 38 | PA: 0.12 mm Ø |
| DXV-200 |
20-200 | 38 | 38 | PA: 0.12 mm Ø |
| DXV-400 |
20-400 | 38 | 38 | PA: 0.20 mm Ø |
| DXV-1000 |
50-1000 | 40 | 38 | PA: 0.30 mm Ø |
| DXV-1500 |
150-1500 | 40 | 38 | PA: 0.30 mm Ø |
| DXV-2000 |
200-2000 | 40 | 38 | PA: 0.50 mm Ø | | |
Other tension ranges available on request. Other units of measure available, such as g.
* Width of bracket assembly
** Suitable for 95% of applications - PA = Polyamide Monofilament
Special calibration using customer supplied samples is recommended, if process material differs significantly from the SCHMIDT calibration material in diameter, rigidity or shape. For this purpose a material sample of about 5 m should be supplied. |
| |
Delivery includes:
Tension meter with carrying case, operating instructions in English or German as requested |  |
| Calibration: |
According to SCHMIDT factory procedure |
| Accuracy: |
±1% full scale or ±1 graduation on scale |
| Scale diameter: |
41 mm |
| Temperature range: |
10-45ºC |
| Air humidity: |
85% RH, max. |
| Housing material: |
Die-cast aluminium |
| Housing dimensions: |
188 x 85 x 45 mm (L x W x H) |
| Weight, net (gross): |
approx. 470 g (1000 g) |
|
|
