Measuring Range 0-50 Kg / 0-110lbs / 0-500 N
(User Selected)
Accurately measure the pull or “pull-off” force on most soldered or solder-less wire terminals, crimped connectors and similar wire terminations.
According to DIN/EN, BS, IEC, UL, SAE or MIL specifications.
The WTT-110 is an easy to use all-in-one, single-range solution suitable for a vast majority of terminal testing applications eliminating the need to purchase any additional grips, fixtures or accessories.
Suitable for wires AWG 30 to AWG 8 (diameters from 0.010" to 0.130").
Free Shipping within Europe!!
Features
Precision strain gauge sensing provides a resolution of 1/5000 with an accuracy of 0.5%
Display force values in “peak-hold” or “continuous” measurement mode
Operates from AC power or built-in rechargeable battery via supplied adapter/ charger
Fabricated from steel and stainless steel, machined to the highest tolerances
Model WTT-110RS includes RS-232 and analog outputs for external data recording
Operating Procedure
To operate, simply follow these steps:
1. Select the appropriately sized slot in the Wire Terminal Fixture and rotate to the front position
2. Insert the terminal and wire so that it is secured on the back-side of the slot
3. Route the wire so that it passes between the lever and the lever clamp
4. Select Peak-Hold or Continuous Measure mode using the PEAK key
5. Press the ZERO key to perform tare function
6. Rotate the lever clockwise, which clamps the wire and begins creating a pull force on the terminal
7. Read current force and breaking force on the digital display
Specifications
Measuring Range
0-50 Kg / 0-110 lbs / 0-500N (units selected via keypad)
Operating: 32 to 104° F (0 to 40° C) Storage: -4 to 140° F (-20 to 60° C)
Weight
30.8 lbs (14 Kg) (Shipping weight 37lbs)
Dimensions
14.2" x 6.3" 2.6" (360 x 160 65mm)
Material
Anodized aluminum, steel and stainless steel
Reverse Display
With the WTT-110 powered off, hold down "UNITS" key and press "ON/OFF" key, release after unit powers on
Complete Kit
The WTT-110 is supplied as a Complete kit that includes; main instrument table, separate hand lever with ball end, 9VDC battery charger 100...240VDC (50...60Hz) with Euro/US/UK plug adaptor, and operating instruction manual. WTT-110RS model also includes connection cable for RS232C (not shown)
Features
Specifications
Precision strain gauge sensing provides a resolution of 1/5000 with an accuracy of 0.5%
