View Larger Image
|
|
TI-25M-MMX
Through Paint Ultrasonic Wall Thickness Gauge |
Measuring Range:
Pulse-Echo Mode (Pit & Flaw Detection) measures from 0.63 to 500 millimeters (0.025 to 19.999 inches).
Echo-Echo Mode (Through Paint & Coatings) measures from 2.54 to 25.4 millimeters (0.1 to 1 inch).
The TI-25M-MMX precisely measures wall thickness of all metals, ceramics, glass and most rigid plastics and the extent of corrosion - from only one side!
The TI-25M-MMX has 2 measuring modes: Single Thickness Reading mode which measures the thickness on one point and the Scan mode which measures over a larger measuring area by “dragging” the probe: the minimum thickness encountered during the scan will be displayed then.
The probe of the TI-25M-MMX wall thickness gauge is waterproof and can also be submerged in water. It is ideal to use in tough field conditions because the gauge is impact-resistant and environmentally sealed..
|
 Resolution of 0.01 mm (0.001 inch) | | Simple operator controls virtually eliminate training | | Ability to measure through paint and eliminate coatings | | Large, backlit LCD display retains last reading |
| | Switch-selected units for inches or mm | | CE Certified | | Special-purpose probes are offered for a variety of applications |
|
| TI-SB | Precision Machined and Finished Includes NIST Report and Test Data |  | | | Click image for more details
|
| TI-SB4 | Uncertified Steel Test Block For convenient confirmation of thickness gauge calibration |  | | | Click image for more details
|
| CF12 | Used to create an ultrasonic coupling between the probe and material to be measured 12oz Bottle |  | | | Click image for more details
|
| TICC-M | Constructed from heavy duty Cordura Nylon Belt loop included Includes wrist & shoulder straps |  | | | Click image for more details
|
| TI-DIN-CAL | Calibration Certificate DIN 55 350 Part 18, § 4.22, DIN ISO 8402 Part 1 |  | | | Click image for more details
|
| TI-V-BLOCK | The V-Block transducer holder offers the operator greater control and repeatabily when measuring on pipes and other curved areas.
For 3/16" & 1/4" Transducers only. |  | | | Click image for more details
|
|
|
Selection Guide - Pit
& Flaw Detection (Pulse-Echo) Mode |
|
Model
Number |
Maximum Coating |
Minimum Wall |
Maximum
Wall |
|
All Models |
0.50mm (0.020") |
2.54mm (0.100") |
152.4mm
(6.000") |
|
Selection Guide -
Thru-Paint (Echo-Echo) Model |
|
Model
Number |
Maximum Coating |
Minimum Wall |
Maximum
Wall |
|
TI-25M-MMX |
1.00mm (0.040") |
2.54mm (0.100") |
25.4mm
(1.000") |
|
TI-25M-MMX-EXT |
2.00mm (0.080") |
5.08mm (0.200") |
127.0mm
(5.000") |
|
 |
Minimum Radius
for Convex Surfaces |
8.89 mm |
| Minimum Radius
for Concave Surfaces |
76.2 mm |
 |
Minimum Headroom |
25.4 mm |
 |
Minimum Sample
Diameter |
3.8 mm |
 |
Minimum Substrate Thickness - F |
NA |
| Minimum Substrate Thickness - NFe |
NA |
| Range |
Pulse-Echo Mode (Pit & Flaw Detection) measures from 0.63 to 500 millimeters (0.025 to 19.999 inches).
Echo-Echo Mode (Through Paint & Coatings) measures from 2.54 to 25.4 millimeters (0.1 to 1 inch). |
| Resolution |
0.01 mm (.001") |
| Display |
4˝ - Digit, 0.5" Backlit LCD |
| Velocity Range |
1250 to 10.000 meters/second (0.0492 to .3937 in./µs.) |
| Probe |
5 MHz, 6.35 mm Diameter (0.25") |
| Probe Wearface |
PEEK (Polyethlethylketone) |
| Cable |
1.2 m (4 ft.) waterproof cable with non-polarized, quick-disconnect connectors. Optional lengths up to 15 m. (50 ft.) |
| Temp. Limits |
Ambient:-30 to 50° C (-20 to 120° F)
Material: -20 to 100° C (0 to 200° F)
Special high temperature probes are optionally available |
| Battery Type |
Two AA batteries |
| Battery Life |
200 hours |
| Weight |
196 g (7 ounces) |
| Size |
64 x 114 x 32 mm
(2.5 x 4.5 x 1.25") |
| Accessories Included |
Probe/cable assembly. 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case. |
| Warranty |
Gauge: 5 Years
Probes: 90 Days |
| The TI-25M-MMX is supplied as a complete kit with the gauge, probe, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST Calibration Certificate, and Operating Instruction Manual - all in a foam-fitted carrying case. |  |
| item |
Price |
Description |
In Cart |
 |
| Product(s) |
| TI-25M-MMX |
€1349.00 |
TI-25M-MMX Complete kit | | |
| TI-25M-MMX-EXT |
€1349.00 |
TI-25M-MMX-EXT Complete kit | | |
| Accessories |
| TICC-M |
€70.00 |
Protective holder | | |
| CF12 |
€20.00 |
Coupling Fluid - 12 oz | | |
| Calibration Certificate |
€99.00 |
Calibration Inspection Certificate | | | | |
|
|
Downloads
