header
 Home > Moisture Meter - ConcreteTramex Concrete Encounter
   Home | About us | Contact Us | Search 
  
  Tramex Concrete Encounter
View Larger Image



Typical Applications
How it works
Features
Complete Kit
Specifications
Buy Now

 
Tramex Concrete Encounter
Tramex Concrete Moisture Encounter 4, Non Destructive Moisture Meter

The Tramex Concrete Encounter Moisture Meter measures moisture content instantly in concrete floors and sand

The Tramex Concrete Encounter is a hand-held electronic moisture meter utilizes non-destructive impedance measurement for moisture determination. Parallel co-planer electrodes are mounted on the unit's base which transmit low-frequency signals into the concrete or cement floor to a depth of approx. 1/2 inch (12.5 mm). The results give the average moisture content to a depth of approximately 4 inches (100 mm) during the drying period.

While concrete under normal conditions can never be completely dry, the instrument has been calibrated on acceptably dry material. It compares the change in impedence caused by the presence of water and displays moisture content on an analog dial.

The meter is calibrated to give percentage moisture content readings on a clean, bare dust free concrete floor slab, thus readings taken on concrete slabs through paint, coating, adhesives or other materials on the surface of the slab should be regarded as qualitative or comparative and no quantitative.


 Typical Applications

Concrete
Cement



 How it works

To carry out moisture tests simply brush any dust from a smooth area of concrete and also from electrodes

After that, switch on the Tramex Concrete Encounter 4 firmly onto the surface, fully compressing the spring loaded signal enhacing contacts on the base of the meter.

Now read the moisture content from the clear analog dial.



 Features
 Strong, robust, electrodes and body
 Includes leather pouch
 Instant readings
 Reproducible result
 Non-destructive operation, no need to probe or drill or mechanically damage the surface
 Hold reading function
 Battery operated, pocket sized
 1 year warranty


 Complete Kit
The Tramex Concrete Moisture Encounter 4 is delivered as a complete kit including:
- Tramex Moisture Meter
- Carrying Pouch
- Instruction Manual
- 9 Volt Battery
Complete kit


 Specifications
Display: Analog meter
Moisture Measuring Range: 2-6% H2O
Measurment depth: ± 1/2 inch (12.5 mm)
Measuring method: Non-destructive signal resistance
Weight: 10.5 oz (298g)
Construction: Extruded Aluminum
Dimensions: 6 x 3 x 1.3 inches
Battery: 9v battery
Warranty: 1 year


 Buy Now

 item Price Description In Cart     Shopping cart
Product(s)   
 Tramex CME4€398.00Tramex Concrete Moisture Encounter 4
Add
 


 [Bolt Tension Meter  [Cable Tension Meter  [Cap Torque Tester  [Coating Thickness Gauge  [Coating & Paint Adhesion Tester  [Dew Point Meter  [Durometer  [Durometer Test Stand  [Dynamometer  [Ergonomics Testing  [Flaw Detectors  [Force Gauge - Digital  [Force Gauge - Mechanical  [Force Grips & Accessories  [Force Sensor  [Force Test Stand  [Intrinsically Safe Gauge  [IVO Counters & Indicators  [Laser Distance Meter  [Leica Construction Laser  [Merlin Glass Analysis Meter  [Metal Hardness Tester  [Moisture Meter - Biomass  [Moisture Meter - Boat  [Moisture Meter - Concrete  [Moisture Meter - Food  [Moisture Meter - Paper  [Moisture Meter - Textile  [Moisture Meter - Wood  [Mountz Torque Testers  [Porosity Detectors  [Raytek IR Thermometer  [Relative Humidity Meter  [Roughness Testers  [Software  [Sonic Tester  [Stroboscope  [Tachometer  [Tension Meter  [Textile Test Instruments  [Thickness Gauge  [Torque Calibration Tester  [Torque Gauge  [Torque Grips & Accessories  [Torque Test Stand  [Torque Sensor  [Torque Screwdrivers  [Torque Wrench  [Tramex Moisture Meters  [Vibration Meter  [Wall Thickness Gauge  [Wire Terminal Tester
Page executed in 0.9837 seconds