View Larger Image
|
|
Compact DC
High Voltage Pulse Porosity Detector - Holiday Detector |
Measuring Ranges:
Model DC15: 0 to 15,000 Volts
Model DC30: 0 to 30,000 Volts
Resolution:
Model DC15: 10 Volts
Model DC30: 10 Volts
The DC Compact™ electric Porosity Detection - also known as Holiday Detector - is ideal for the detection of pores and faults in dielectric (electrically insulating) coatings such as paint, enamel and plastic coatings on all metals, also on concrete.
The material-friendly DC Compact™ detector has proved itself indispensable on the production line and in the field, for instance in the production of pipelines, storage tanks, pipelines, enameled construction parts for the chemical industry, etc
Conforms to:
ASTM G62-87 (1998), NACE RP0274-98, NACE RP0490-2001, NACE RP0188-99, ASTM D4787-93 (1999), JIS G-3491, JIS G-3492, ANSI/AWWA C214-89, ANSI/AWWA C213-94, ISO 2746:1998 & AS3894.1-2002 |
 Lightweight with ABS case | | Momentary on switch allows auto shut-of | | Digital display of applied voltage with integral battery
condition indicator | | Regulated DC voltage | | Voltage ranges of 0-15Kv or 0-30Kv, fully adjustable | | Clip-on battery pack |
| | Constant test current | | Sensitivity control | | Overcharge protection | | Single power supply | | Earphones for noisy environments | | Optional on/off switch in handle |
|
1. LCD display (including battery condition indicator)
2. Voltage control (10 turn)
3. Visual alarm indicates when fault is found
4. On switch
5. Off/test switch
6. Sensitivity control for the alarm
7. Audible alarm when fault is found
8. High Voltage probe connector
9. Fuse (1.6A slow blow) 5 x 20mm
10. Earth connection point
11. Charge connector - allows operation while charging is in progress
12. Clip-on battery pack
13. Earphone (connected on opposite side)
|
FBE
Flat Brush Electrodes |  |
| | | Click image for more info
|
CPC
Circular Pipeline Coils |  |
| | | Click image for more info
|
IBE
Circular Internal Brush Electrodes |  |
| | | Click image for more info
|
EBE
External Rolling Pipeline Brushes |  |
| | | Click image for more info
|
DC-CREST
High Voltage DC Crest Meter |  |
| | | Click image for more info
|
Used for detection of coating porosity (pin-holes,
or holidays) in dielectric (insulation type) coatings
on conductive substrates, including concrete.
Suitable for Production Pipeline Coating
operations, Tank-work and Structures. Ideal for use
on storage tanks, valves and pipelines.
Housed in a fully portable ABS case, the Detectors
deliver stabilised DC output of up to 30kv. Constant
current source maintains applied test voltage. Full
test current at low voltages (where it is needed
most) when testing at low film builds (eg:
150µm - as per AS3894.1-2002).
Incorporating momentary-on and continuous-on
switches (mounted on the front panel), allowing the
units to be switched on momentarily for safety, or
run continuously.
No need to swap power supplies or change probes
to change voltage - the Detectors have clip-on
battery packs that can be separately charged. Can
operate of mains power (via the charger) during
recharging. Fully recharged in 10 hours. Regulated
DC output fully adjustable. Applied voltage and
battery condition are continuously shown on the
Liquid Crystal Display. |
The Compact DC is delivered as a complete kit, 2 versions are available
Industrial Kit:
Detector with clip-on power pack, 10hr Charger,
Probe handle with neon and 2m lead, 60mm
Connector for flat brushes, 7m Earth lead with clamp,
Fan Brush, 250mm Flat brass wire brush, 450mm
Probe extension, Air-operated earphones, Shoulder &
Waist Harness, Kit Case, Operating instructions with
Calibration Certificate.
Pipeline Kit:
Detector with clip-on power pack, Spare clip-on
battery pack, 10hr Charger, Probe handle with neon
and 2m lead, 60mm Connector for flat brushes, 7m
Earth lead with clamp, Fan brush, Coil joiner with
450mm connector, Air-operated earphones, Shoulder
& Waist Harness, Kit Case, Operating instructions
with Calibration certificate. |  |
| Test voltage DC15: |
0 - 15kV |
| Test voltage DC30: |
0 - 30kV |
| Resolution: |
10 Volt |
| LCD: |
3 1/2 digits |
| Battery life: |
> 8 h |
| Unit weight: |
2.2 kg |
| Packed weight: |
6 kg |
| Short circuit, applied voltage: |
0.5 mA |
| Length of high-voltage silicone connection lead: |
2 m |
| Dimensions: |
260 x 160 x 70 mm |
| item |
Price |
Description |
In Cart |
 |
| Product(s) |
| DC15-IK | €1725.00 | Porosity Holiday Detector Industrial Kit | | |
| DC15-PK | €1725.00 | Holiday Porosity Detector Pipeline Kit | | |
| DC30-IK | €1975.00 | Holiday Porosity Detector Industrial Kit | | |
| DC30-PK | €1975.00 | Holiday Porosity Detector Pipeline Kit | | |
| Accessories |
| 0868 | €75.00 | Battery charger (selectable 110/220/240V) | | |
| 0869 | €75.00 | Battery charger 230V with CE | | |
| 0647 | €55.00 | Fuse holder, including fuse | | |
| 0222 | €60.00 | Coil joiner only for pipeline coils | | |
| 0214 | €70.00 | Neon light holder with neon globe | | |
| 0215 | €35.00 | Neon globe only | | |
| 0842 | €105.00 | Power pack (spare slip-out gel cell) | | | | |
All mentioned prices are excluding VAT |
|
