View Larger Image
|
|
TI-25S
Ultrasonic Wall Thickness Gauge |
If different materials have to be tested regularly the TI-25S is the ideal product.
It contains 8 velocities of the most common materials (see complete List of Materials below) and two velocities that the user can set using a simple software program.
The TI-25S has an easy to read backlit display, even in dim light, and the unit operates for up to 200 hours on a single set of batteries.
The TI-25S comes complete, ready to use, and is protected by our 5 year limited warranty.
Velocity Settings
8 preset velocities and 2 custom velocities on the TI-25S allow the user to customize it for specific applications, or to tune the calibration to be optimized for a specific type of material. Each time the "MATL Key" is pressed the velocity will toggle from one to the next in a circular pattern. The preset velocities are as follows:
- 1. Aluminium 2024 (6375 m/s )
- 2. Stainless Steel 303 (5664 m/s)
- 3. Steel 4340 (5918 m/s)
- 4. Cast Iron (4546 m/s)
- 5. Plexiglass (2692 m/s)
- 6. PVC (2387 m/s)
- 7. Polystyrene (2337 m/s)
- 8. Polyurethane (1778m/s)
- 9. Custom 1
- 10.Custom 2
Note: When the Custom 1 & 2 options are needed, they are set using the PC software (free) and downloaded to the gauge using the data cable (optional, p/n N-306-0010)
|
 Multi-function 4.5 digit liquid crystal display with 0.500 inch numerals, backlit for use in poor light conditions. | | Measures from 0.025 to 19.999 inches (0.63 to 199.99 millimeters) switch to select English or metric units. | | 8 pre-set velocities and 2 custom velocities |
| | Measurements displayed in inches, nches/microsecond, millimeters, and meters/second. | | Four readings per second for single point measurements | | Ability to change between velocities without the use of computer software |
|
Each time the "MATL" key is pressed, the material type (calibration setting of the acoustic velocity) changes from one type to the other. The abbreviations, description and sequence is shown below.
*Note: If the Custom 1 and 2 are needed, they are set using the PC software (free) and downloaded to gauge using the data cable (optional, p/n N-306-0010) |
| TI-SB | Precision Machined and Finished Includes NIST Report and Test Data |  | | | Click image for more details
|
| TI-SB4 | Uncertified Steel Test Block For convenient confirmation of thickness gauge calibration |  | | | Click image for more details
|
| TICC-M | Constructed from heavy duty Cordura Nylon Belt loop included Includes wrist & shoulder straps |  | | | Click image for more details
|
| CF12 | Used to create an ultrasonic coupling between the probe and material to be measured 355ml (12oz) bottle |  | | | Click image for more details
|
| TI-DIN-CAL | Calibration Certificate DIN 55 350 Part 18, § 4.22, DIN ISO 8402 Part 1 |  | | | Click image for more details
|
| TI-V-BLOCK | The V-Block transducer holder offers the operator greater control and repeatabily when measuring on pipes and other curved areas.
For 3/16" & 1/4" Transducers only. |  | | | Click image for more details
|
| N-306-0010 | RS232 (DB-9 to Lemo) Data Cable 182cm |  | | | Click image for more details
|
|
 |
Minimum Radius
for Convex Surfaces |
8.89 mm |
| Minimum Radius
for Concave Surfaces |
76.2 mm |
 |
Minimum Headroom |
25.4 mm |
 |
Minimum Sample
Diameter |
3.8 mm |
 |
Minimum Substrate Thickness - F |
NA |
| Minimum Substrate Thickness - NFe |
NA |
| Measuring Range: |
0.63 to 199.99 millimeters
0.025 to 19.999 inches |
| Range in Steel: |
0.60-150.0 mm (0.025-6.00") |
| Resolution: |
0.01 millimeter
0.001 inch |
| Velocity Range: |
1250 to 10,000 meters/sec
.0492 to .3937 in/µs |
| Dimensions: |
64 x 121 x 32 mm
(2.5 W x 4.75 H x 1.25 D inches) |
| Display: |
4˝ - Digit, 0.5" Backlit LCD |
| Probe: |
1/4", 7.5 MHz, actual wearface is 10 mm
Probe P/N: T-102-3300 |
| Cable: |
1.2 m (4 ft.) waterproof cable with non-polarized, quick-disconnect connectors. Optional lengths up to 15 m (50 ft.). |
| Temp. Limits: |
Ambient: -30 to 50° C (-20 to 120° F)
Material: -20 to 100° C (-0 to 200° F)
Special high temperature probes are optionally available. |
| Battery Type: |
Two 1.5V alkaline or 1.2V NiCad AA cells. |
| Battery Life: |
Typically operates for 200 hours on alkaline and 130 hours on NiCad. |
| Weight: |
283 gr |
| Accessories: |
Probe/cable assembly. 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case. |
| Warranty: |
Gauge: 5 Years
Probes: 90 Days |
The TI-25S is supplied as a complete kit with the gauge, probe, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST-Traceable Calibration Certificate, and Operating Instruction Manual - all in a foam-fitted carrying case.
DATA CABLE MUST BE ORDERED SEPARATELY TO PROGRAM USER #1 and #2 CUSTOM VELOCITIES
|  |
| item |
Price |
Description |
In Cart |
 |
| Product(s) |
| TI-25S |
€925.00 |
TI-25S Complete Kit | | |
| Accessories |
| TICC-M |
€70.00 |
Protective holder | | |
| CF-AN |
€9.00 |
Coupling Fluid - 200 ml | | |
| Calibration Certificate |
€99.00 |
Calibration Inspection Certificate | | |
| V-Block |
€175.00 |
V-Block Transducer Holder | | |
| TI-SB4 |
€105.00 |
Uncertified Steel Testblock | | |
| TI-SB-4H |
€329.00 |
Steel Test Block | | |
| TI-SB-4L |
€329.00 |
Steel Test Block | | |
| TI-SB-5L |
€329.00 |
Certified Steel Test Step Block | | |
| T102-3300 |
€295.00 |
1/4", 7.5 MHz Probe | | |
| N-306-0010 |
€120.00 |
RS232 Data Cable 182cm | | | | |
All mentioned prices are excluding VAT |
|
Downloads
