TI-MMX-SDL High Performance Data Logging Wall Thickness Gauge


Home > Wall Thickness Gauge ⇒ TI-MMX-SDL
Home \| About us \| Contact Us \| Search
Product Selector

View Larger Image

Download DataComm 2 Software

Features

Accessories

Downloads

Specifications

Complete Kit

Buy Now

TI-MMX-SDL
High Performance Data Logging Wall Thickness Gauge

The CHECKLINE ultrasonic thickness gauge model TI-MMX-SDL provides the user with many advanced features. It has a complete alphanumeric system for datalogging which can store thousands of data values.

The TI-MMX-SDL is easy to use and has the highest resolution graphic LCD available on the market.

Click here to download DataComm
Data Transfer & Analysis Software

Equipped with multiple viewing options to provide users with a complete set of inspection tools: (RF waveform, +/- Rectified waveform and Large Digits).

The time-based B-Scan feature displays a cross section of the test material. It is commonly used to display the profile of the bottom surface of the test material.

Built in hardware AGC gain control for through paint measurements in multi mode operation.

The TI-MMX-SDL has the ability to store 64 custom user defined setups. All factory setups can be selected, edited and saved to any setup location.

CE Certified

Use the visual alarm to set hi and lo limits for applications requiring specific tolerances. If the actual thickness value is above or below the limits, a red light is illuminated.

The high speed scan feature speeds up the inspection process by making 32 measurements per second. Remove transducer from the test material, and display the minimum measurement scanned.

Use the find feature to locate the detection point, while automatically adjusting the display to bring the signal into view.

The TI-MMX-SDL also comes complete with our Windows® PC software for transferring data to and from a PC.

Includes NIST Calibration Certificate

TI-SB

Precision Machined and Finished

Includes NIST Report and Test Data

Click image for more details

TI-SB4

Uncertified Steel Test Block

For convenient confirmation of thickness gauge calibration

Click image for more details

CF12

Used to create an ultrasonic coupling between the probe and material to be measured

12oz Bottle

Click image for more details

CF2H

Temperature Range:
0° to 600° F
-18° to 315° C

Supplied in 60ml (2oz) tube

Click image for more details

TICC-MVX

Constructed from heavy duty Cordura Nylon

Built-in belt loop

Includes wrist & shoulder straps

Click image for more details

TI-V-BLOCK
The V-Block transducer holder offers the operator greater control and repeatabily when measuring on pipes and other curved areas. For 3/16" & 1/4" Transducers only.
	Click image for more details

TI-DIN-CAL

Calibration Certificate

DIN 55 350 Part 18, § 4.22, DIN ISO 8402 Part 1

Click image for more details

TI-PRINTER

Small, portable and easy to use

Prints statistical data from ultrasonic wall thickness gauges with a serial (RS232) output

Click image for more details

RS232-2-USB

Vivanco Serial (RS232) to USB Adapter

USB to D-sub 9p male connector

Click image for more details

N-306-0010
RS232 (DB-9 to Lemo) Data Cable 182cm
	Click image for more details

NIST Certificate Sample

Range in Steel:	Pulse-Echo Mode: Pit and Flaw detection measures from 0.63 to 254 millimeters (0.025 - 9.999inches) Echo-Echo Mode: Thru Paint & coatings measures from 2.54 to 102 mm (0.1 - 4.0 inches). Range will vary +/- depending on the thickness of the coating.
Resolution:	0.01mm (.001 inches)
Velocity Range:	.0492 to .3936 in./ms 1250 to 9999 meters/sec
Units:	English & Metric
Measurement Modes:	- Pulse-Echo (flaws, pits) - Echo-Echo (thru-paint)
Transducer Types:	Dual Element (1 to 10 MHz).
Memory:	16 megabit non-volatile ram
Memory capacity:	12.000 pages with 1 reading and waveform per page
Power Source:	Three 1.5V alkaline or 1.2V NiCad AA cells
Battery Life:	Typically operates for 150 hours on alkaline and 100 hours on NiCad
Auto Power off:	if idle 5 min
Display:	1/8 in. VGA grayscale display 62 x 45.7mm
Keyboard:	Membrane switch with twelve tactile keys
Case:	Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed).
Operating Temperature:	-10° to 60°C (-14° to 140°F)
Weigth, net:	383 grams
Dimensions:	63.5 W x 165 H x 31.5 D mm
Warranty:	2 year limited
Certification:	CE Approved, Factory calibration traceable to US standards

The TI-MMX-SDL is supplied as a complete kit with:
- TI-MMX-SDL wall thickness gauge
- 4 oz. bottle of coupling fluid
- 2 AA batteries
- NIST Calibration Certificate
- data transfer software
- serial output cable
- instruction manual
- delivered in a foam-fitted carrying case

TRANSDUCER SOLD SEPERATELY

item

Price

Description

In Cart

Product(s)

TI-MMX-SDL

€1425.00

TI-MMX-SDL Ultrasonic Thickness Gauge PROBE NOT INCLUDED

Checkline Europe Dennenweg 225B, 7545WE Enschede - Netherlands TEL: +31 (0)88 0029000 FAX: +31 (0)88 0029009 KvK nr. 08143059
[Coating Thickness Gauge] [Wall Thickness Gauge] [Force gauge] [Torque Instruments] [Bolt Tension Meter] [Durometer - Hardness Tester] [Tachometer] [Thickness Gauge] [Stroboscope] [Disto Laser Distance Meter] [Leica Geolasers] [Tension Meter] [Raytek IR Thermometer] [Vibration Meter] [Tramex Moisture Meters] [Roughness Testers] [Textile Test Instruments]