DI-1M torque testers are a perfect tool for on-the-spot calibration of impact drivers and air tools. It will calibrate any type of power driver. The fast response units give a digital readout of peak value in either clockwise or counterclockwise direction and also indicate the number of blows for a selected time period from 0.1 to 9.9 seconds. These instruments have an accuracy of ±0.5%, ±1 LSD and lbf-in/lbf-ft, kgf-cm/kgf-m, or N-cm/N-m units are selectable. RS-232 output, auto zero reset, auto shutoff and low battery indicator complete the set of features. It runs on an internal NiCad battery or the included AC adapter.
Selectable modes: Peak, Real Time and Peak Down.
Peak mode captures the peak torque achieved during a test. PEAK reading will not change until a higher value is measured.
Real Time mode displays the real time transient torque value.
Peak down captures the critical first peak value and will not change even if a higher value is subsequently measured.
The DI-1M also provides peak data for SPC (statistical process control) via the RS232 port. Click on the link below for torque tester data acquisition software.
The DI-1M is supplied with the remote sensor, display unit, cable and AC adapter/charger.
Calibrate your own air tools and impact wrenches and save down time.
L-bracket sold separately.
NOTE: The DI-1M Torque Tester is not CE certified
|
Features
Tension Ranges
Ergonomic light weight, torque tester with heavy duty metal construction