header
 Home > Tension Meter > Tension Indicators and Amplifiers ⇒ DPM502
   Home | About us | Contact Us | Search 
 Product Selector 
  DPM502
View Larger Image



Features
User Controls
Related Products
Specifications
Dimensions

  
DPM502
Digital Tension Indicator

The DPM502 is designed to connect to the TS621 or TS481 Strain Gauge Amplifier, as well as the RFSE Tension Sensor.

It incorporates built-in calibration adjustments to scale the tension values into display units. The 3 1 /2 LED display has a user-set decimal point and will display values up to 1999. Faceplate is easily removed to make calibration adjustments.


 Features
 Selectable “damping function” reduces display fluctuations
 Scaling by means of 2 multiturn trimmers (rough / coarse)
 Easy snap-in installation
 24V DC power supply with galvanic isolation


 User Controls

User control pots & dip switches are accessed behind display panel.



 Related Products

RFS
On-Line Tension Sensor		related

bluedot Resolution of 0.1% and better

bluedot Rugged stainless steel housing is environmentally sealed

bluedot Overload protection up to 800%

 Click image for more info

TS481
Strain Gauge Measurement Amplifier		related

bluedot Galvanic Isolation minimizes the chance for signal interference, including ground faults

bluedot Provides accuracy of ±0.1%

bluedot User-enabled "damping function" eliminates tension fluctuations

 Click image for more info

TS621
Strain Gauge Amplifier		related

bluedot Designed for use with a wide range of strain-gauge-based force, load and tension sensors

bluedot 0-10VDC analog output

 Click image for more info

MU621
Tension Indicator/Amplifier Console		related

bluedot For strain gauge sensors

bluedot 1 to 4 measuring channels

 Click image for more info


 Specifications
Display 3 1 /2 - digit LED (1999 max.) 14mm height
Decimal Point User-Selected
Damping Rate 0.2 to 4 sec.
Display Update Rate 0.5 sec.
Power Required 24 VDC @ 50 mA (approx)
Panel Cutout 92 x 22mm
Weight 3.5 ounces (100 g)
Dimensions 96mm W x 77mm D x 24mm H (3.7" W x 3" D x 1" H)


 Dimensions
Dimensions

 Checkline Europe Dennenweg 225B, 7545WE Enschede - Netherlands TEL: +31 (0)88 0029000   FAX: +31 (0)88 0029009   KvK nr. 08143059
 [Bolt Tension Meter]   [Cable Tension Meter]   [Cap Torque Tester]   [Coating Thickness Gauge]   [Coating & Paint Adhesion Tester]   [Dew Point Meter]   [Durometer]   [Durometer Test Stand]   [Dynamometer]   [Ergnonomics Testing]   [Flaw Detector]   [Force Gauge - Digital]   [Force Gauge - Mechanical]   [Force Grips & Accessories]   [Force Sensor]   [Force Test Stand]   [Intrinsically Safe Gauge]   [IVO Counters & Indicators]   [Laser Distance Meter]   [Leica Construction Laser]   [Merlin Glass Analysis Meter]   [Metal Hardness Tester]   [Moisture Meter]   [Mountz Torque Testers]   [Porosity Detectors]   [Raytek IR Thermometer]   [Roughness Testers]   [Software]   [Sonic Tester]   [Stroboscope]   [Tachometer]   [Tension Meter]   [Textile Test Instruments]   [Thickness Gauge]   [Torque Calibration Tester]   [Torque Gauge]   [Torque Grips & Accessories]   [Torque Test Stand]   [Torque Sensor]   [Torque Screwdrivers]   [Torque Wrench]   [Tramex Moisture Meters]   [Vibration Meter]   [Wall Thickness Gauge]   [Wire Terminal Tester] 
Page executed in 1.3039 seconds