View Larger Image
|
|
DCF-3000PRO
Professional Coating Thickness Gauge |
3 Models
DCF-3000PRO - Ferrous Only Model
DCN-3000PRO - Non-Ferrous Only Model
DCFN-3000PRO - Combination Ferrous & Non-Ferrous Model
Measuring Range: 0-1500µm (0-60 mils)
The new Check-Line 3000PRO Series coating thickness gauge is a multifunctional fully menu driven gauge for fast, professional and precise coating thickness measurement for:
paint and electroplated coatings on iron and steel
paint and anodising coatings on non-ferrous metals and on austenitic stainless steels
The recording and further processing of stored measurement data are just as easy to carry out as the measurement itself. The file names can be alphanumerically assigned via an input panel and managed in a data memory.
|
 Automatic identification of the substrate | | Calibration-free measurements (calibration only in exceptional cases) | | Mobile and stationary operation with only one gauge | | Highly wear-resistant measuring
poles made of carbide metal | | Special probes for unusual
measurement tasks | | Precise measurements on
different geometries thanks
to simple calibration methods | | Safe use even for special applications
such as sand-blasted surfaces, small
parts and curved surfaces | | Scan mode for the quick recognition
of coating thickness variations on
large surfaces, including display of
minimum and maximum readings | | Display backlight for bad ambient
lighting conditions |
| | Online statistics with all statistical parameters | | Easy to operate, well-known
from mobile phones | | Intuitive menu guidance via
dialog with the user | | Free choice of language –
German, English, French | | Extensive data memory for
the management of different
measurement series | | Alphanumerical file names can be individually stored for every measurement task | | Infrared interface for wireless data transfer to printer and PC | | No additional data transfer software
required thanks to the use of
Windows® standard application
(HyperTerminal) | | NIST Certificate Included at no additional cost |
|
|
High Temperature Probe Footer
The high temperature probe footer is a beige contact ring made of heat-resistant plastic. This ring has a shape that is identical to the original black v-grooved ring and is available for the 3000FX and 3000PRO only. With this probe footer, hot coatings such as freshly-burnt-in powder coatings can be measured with a surface temperature of up to 150°C (302°F). |
The DCF-3000PRO is supplied as a complete that includes:
- coating thickness gauge
- probe
- manufacturer's certificate
- ferrous zero plate
- 2 calibration foils
- 2 AA batteries
- soft pouch
- instruction manual
- rugged plastic carrying case
|  |
| Calibration Standards | Calibration Foils for DCF(N)-3000 Series Instruments various thicknesses:
10µm, 30µm, 40µm, 50µm, 100µm, 200µm, 360µm, 500µm, 800µm, 1000µm and 1500µm.
|  | | | Click image for more details
|
| 3000-IR | For data transfer to a standard PC (RS232) or printer (RS232). The 3000-IR is self-powered by the RS-232 (serial) or USB port Meets IrDA 1.0 physical specifications |  | | | Click image for more details
|
| 3000-IRP | Integrated IrDA infrared interface Archivable up to 5 years, if dryly stored without UV exposure Speed of printing: 16 lines/sec |  | | | Click image for more details
|
|
|
Standard
probe & and PRO-90° probe |
|
Mils |
| 0.00 - 9.99
mils |
0.01 mils |
| 10.00 -
24.98 mils |
0.02 mils |
| 25.00 -
49.95 mils |
0.05 mils |
| 50.0 - 99.9
mils |
0.1 mils |
| |
|
Microns (µm) |
| 0.0 - 99.9
µm |
0.1 µm |
| 100.0 -
249.8 µm |
0.2 µm |
| 250.0 -
499.5 µm |
0.5 µm |
| 500 - 999 µm |
1 µm |
| 1.000 -
1.998 mm |
0.002 mm |
|
| Gauge versions: |
DCF-3000PRO:
for measurements on iron/steel |
| Measuring principle: |
Magnetic induction method |
| Measuring range: |
0 - 1500 µm (0 - 60.00 mils) |
| Tolerance: |
± (0.7 µm/0.04 mils + 1% of reading) |
| Resolution: |
Refer To Table Above |
| Display: |
4-digit display (digit height 10 mm/0.4”) and 32 alphanumerical characters; switchable backlight |
| Minimum measurement area: |
5 mm x 5mm/0.2” x 0.2” |
| Minimum curvature radius: |
convex 2mm/0.08”; concave 5mm/0.2” |
| Minimum substrate thickness: |
0.2mm/8 mils |
| Calibration methods: |
- Factory calibration: no calibration required for standard applications
- Zeroing (1-point calibration): measurements on small geometries
- Zeroing and foil calibration (2-point calibration): increased measuring accuracy
- Two-foil calibration: especially for rough, sand-blasted surfaces
- CTC: calibration on coated object if zeroing is not possible
- Zero offset: addition/subtraction of a constant value to/from the reading |
| Limit values: |
Selectable; optical and acoustic signal if limit value is exceeded |
| Scan mode: |
For continuous measurements; for the quick recognition of coating thickness variations;
with permanent display of minimum and maximum reading |
| Statistics: |
Single-value statistics: n, avarage x, s, kvar, min, max, cp, cpk from max. 10,000 readings
Block-value statistics: n, avarage x , avarage s, avarage kvar , min, max, cp, cpk; block size 3 to 100 readings |
| Data memory: |
10,000 readings in max. 500 selectable files; alphanumerical file names; stored readings and statistical values individually recallable |
| Interfaces: |
Infrared and serial RS232 interface |
| Language: |
Operator prompting and documentation in German, English, French (optional other languages) |
| Operating temperature: |
0 °C to 50 °C/32 °F to 122 °F (storage temperature - 20 °C to +60 °C/-4 °F to 140 °F) |
| Surface temperature: |
-15 °C to 60 °C/5 °F to 140 °F (briefly above 60 °C/140 °F up to 150 °C/302 °F) |
| Power supply: |
2 x round cell (AA) 1.5 V up to 60 hours of operating time |
| Housing/keypad: |
Protection class IP52 (protection against dust and dripping water) |
| Dimensions: |
Gauge: 140 mm x 62 mm x 30mm/5.6” x 2.5” x 1.2” (HxWxD)
Probe: dia. 14 mm x 83mm/dia. 0.56” x 3.3” |
| Weight: |
approx. 200 g/7 oz (gauge including batteries and probe) |
| Standards: |
DIN EN ISO, ASTM, BS |
| Warranty: |
1 year |
| item |
Price |
Description |
In Cart |
 |
| Product(s) |
| DCF-3000PRO |
€1065.00 |
DCF-3000PRO - Coating Thickness Gauge | | |
| Accessories |
| 3000-IRP |
€499.00 |
3000-IRP Portable infra-red thermal data printer | | |
| 3000-IR-RS232 |
€69.00 |
IrDA Adapter RS232 (serial) | | |
| 3000-IR-USB |
€99.00 |
IrDA Adapter USB | | |
| 3000-HTF |
€35.00 |
High Temp Footer | | | | |
All mentioned prices are excluding VAT |
|
