View Larger Image
|
|
HTG2
Digital Torque Gauge with programmable setpoints |
Model HTG digital torque gauge offers programmable high/low setpoints for go/no-go testing. ORANGE lights up for torque measurements less than Low setpoint, GREEN for between High and Low setpoint, and RED for over High setpoint.
Store up to 960 values in memory, which can be transmitted using serial output. Use the real time mode to display torque transients, or the peak mode to capture the peak torque achieved during a test. Selectable measuring units of lbf-in, kgf-cm, or N-cm.
HTG torque gauges are sold in kits which include the torque gauge, sensor, six foot cable, and AC adapter/charger. Built-in NiCad rechargeable batteries.
|
 Display of opening or close torque (left and right torque) | | Selectable units: Nm, kgfm, Lb.in | | Storage of 960 values, which can be recalled or downloaded to a PC | | 4 different rorque sensors available (standard only TA-00 included) |
| Two selectable modes:
Real time: To display load transients
Peak Modes: To capture the peak force achieved during test | | Programmable High/Low setpoints for go/no-go testing with color-coded indicators (orange, green, red) in the LED display and relais outputs | | Output signals (RS232, analog) and Mitutoyo Digimatic |
|
| Model |
Ranges | Resolution |
| HTG2-2 |
0-2.000 Nm | 0.001 Nm |
| HTG2-5 |
0-5.000 Nm | 0.001 Nm |
| HTG2-10 |
0-10.000 Nm | 0.01 Nm |
| HTG2-2NC |
0 - 200 Ncm | 0.1 Ncm |
| HTG2-5NC |
0 - 500 Ncm | 0.1 Ncm |
| HTG2-10NC |
0 - 1000 Ncm | 1 Ncm | | |
Delivery includes
Torque meter with 1 sensor and pin chuck (standard Model TA-00), connecting cable 2m long, manual (english), manufacturer's calibration report |  |
The torque sensor can be equiped with tips other than standard (pin chuck model TA-00).
(1) TA-00: pin chuck 0.5 to 6.5 mm diameter
(2) TA-01: Torque wrench 3/8" Square drive (male)
(3) TA-02: Torque screwdriver 1/4" square drive (female) with 3 Pins (Philips No. 1, No. 2 and screw blade 6.3 mm)
(4) TA-03: Torque pin chuck 1.2 to 13 mm diameter
PLEASE SELECT ONE OF THESE TIPS WHEN YOU ORDER!!
ONLY THE TA-03 WILL BE CHARGED EXTRA.
|
| CB-104 | Connecting cables analog for connection to a line recorder. Connecting cable for series DPZ, DPZS, DPZH, DTX and HTG. |  | | | Click image for more details
|
| CB-204 | Connection cables for RS-232C for connection to PC Sub D9 female for series DPZ, DPZS, DPZH, DTX and HTG. |  | | | Click image for more details
|
| CB-304 | Digimatic connecting cables for connecting to Mitutoyo evaluation units. For series DPZ, DPZS, DPZH, DTX and HTG |  | | | Click image for more details
|
|
| Accuracy: |
± 0.5 % Full scale ± 1 digit |
| Measuring frequency: |
30 times/s |
| Selectable units: |
Nm, kgfm, lb.in |
| Display: |
4 digit, 14 mm high |
| Overload capacity: |
150 % Full scale (flashing LED beyond 108% full scale) open collector output signal |
| Zero adjustment: |
10% Full scale |
| A/D converter: |
16 bit |
| Memory: |
non-volatile, recall up to 960 loads, recall both peaks, open and close torque |
| Setpoints: |
Min, Max (programmable), with output signal |
| Output signal: |
RS232C (8,1,N,19200), analog ± 2V DC, Open collector 4x (+NG, Ok, -NG, OVL), max. 30V DC, 10mA, Mitutoyo Digimatic |
| Temperature range: |
5-45`C |
| Air humidity: |
85% RH, max. |
| Power supply: |
Rechargeable NiCd battery pack (approx. 8 hours continuous use) and/or 230 V AC adapter |
| Housing dimensions: (approx.) |
Display unit:220x78x32mm (LxBxH)
Sensor: 150x39mm (lxdiam.) |
| Weight: (approx.) |
Display unit: 440g / Sensor: 530 g
Complete set: 2000 g |
 |
| item |
Price |
Description |
In Cart |
 |
| Product(s) |
| HTG2-2 |
€1495.00 |
HTG2-2 Torque Meter | | |
| HTG2-5 |
€1495.00 |
HTG2-5 Torque Meter | | |
| HTG2-10 |
€1495.00 |
HTG2-10 Torque Meter | | |
| HTG2-2NCE |
€1495.00 |
HTG2-2NCE Torque Meter | | |
| HTG2-5NCE |
€1495.00 |
HTG2-5NCE Torque Meter | | |
| HTG2-10NCE |
€1495.00 |
HTG2-10NCE Torque Meter | | |
| Accessories |
| TA-00 |
€150.00 |
Torque Pin chuck 0.5 to 6.5mm diameter | | |
| TA-01 |
€150.00 |
Torque wrench 3/8" square drive male | | |
| TA-02 |
€150.00 |
Torque screw driver 1/4" | | |
| TA-03 |
€180.00 |
Pin chuck 1.2 to 13mm diameter | | | | |
All mentioned prices are excluding VAT |
|
