View Larger Image
|
|
HV-500N
Force gauge test stand |
Teststand suitable for compression and tension testing. This teststand is specificly designed for Imada force gauges but can be used for Shimpo gauges also using a adapter plate. Compression or tension can be applied be turning the wheel on the side of the teststand. |
 Manual hand wheel operation for compression (push) and tension (pull) measurements | | The direction that the hand wheel is turned determines the direction the force gauge works (Push or Pull) | | All Imada force gauges up to 500 N can be mounted | | Large platform base accepts special attachments |
| | Force gauge remains in position when hand wheel is released. ideal for "creep" testing rubber or other elestic materials | | Hand wheel operation allows you to position the gauge, hold it in place or advance it at a constant manual speed | | For mounting Shimpo force gauges a special mounting plate Code MP-S is available | | Forcegauge is not included |
|
Distance Measuring System
To measure the exact travel distance of the forcegauge on Imada vertical test stands:
- User selectable units mm or inch
- Zero setting
- Digimatic output
Specifications:
Resolution: 0.01mm or 0.005 inch
Accuracy: 0.1% of reading or 0.01/0.005 inch, whichever is greater
Stroke: app. 5 mm, 2 inch
|
| Capacity: |
Maximum 500N |
| Stroke: |
350 mm |
| Usage: |
One complete turn = 2mm |
| Weigth, net: |
approx. 10 Kg |
| Dimensions: |
327x309x597mm (LxWxH) |
|
|
