View Larger Image
|
|
TI-25M
Ultrasonic Wall Thickness Gauge |
Measuring Range
0.025 - 6.00 inches
0.60 - 150.0 mm
Our CHECK-LINE TI-25M is designed to measure accurately the thickness of walls and the extent of corrosion of metals, ceramics, glass and the most rigid plastics from only one side!
You can use the TI-25M in different modes, either in a Single Thickness Reading mode or in a Scan mode. In the Scan mode, the probe has to be dragged over a large measuring area. Finally the minimum thickness reading measured during the “Scan” process will be displayed.
Due to its perfect design, the TI-25M probe is waterproof and can be submerged in water. Additionally, our gauge is impact-resistant, environmentally sealed and provides therefore an operation without any trouble even under tough field conditions.
|
 CE Certified | | Simple operator controls | | Resolution of 0.001 inch (0,01 mm) | | Large, backlit LCD display retains last reading |
| | Special-purpose probes are offered for a variety of applications | | Switch-selected units for inches or mm | | For underwater surveying, probe cable lengths up to 50 feet are optionally | | Includes NIST Calibration Certificate |
|
| TI-SB | Precision Machined and Finished Includes NIST Report and Test Data |  | | | Click image for more details
|
| TI-SB4 | Uncertified Steel Test Block For convenient confirmation of thickness gauge calibration |  | | | Click image for more details
|
| TICC-M | Constructed from heavy duty Cordura Nylon Belt loop included Includes wrist & shoulder straps |  | | | Click image for more details
|
| CF12 | Used to create an ultrasonic coupling between the probe and material to be measured 12oz Bottle |  | | | Click image for more details
|
| CF2H | Temperature Range:
0° to 600° F
-18° to 315° C Supplied in 60ml (2oz) tube |  | | | Click image for more details
|
| TI-25-UW-50 | 50 Ft. Length, Waterproof Probe/Cable assembly with non-polarized, Dual-Lemo connectors. 1/2", 5 MHz Probe for wide variety of steel, stainless steel, aluminum and similar applications. |  | | | Click image for more details
|
| TI-DIN-CAL | Calibration Certificate DIN 55 350 Part 18, § 4.22, DIN ISO 8402 Part 1 |  | | | Click image for more details
|
| TI-V-BLOCK | The V-Block transducer holder offers the operator greater control and repeatabily when measuring on pipes and other curved areas.
For 3/16" & 1/4" Transducers only. |  | | | Click image for more details
|
|
 |
Minimum Radius
for Convex Surfaces |
8.89 mm |
| Minimum Radius
for Concave Surfaces |
76.2 mm |
 |
Minimum Headroom |
25.4 mm |
 |
Minimum Sample
Diameter |
3.8 mm |
 |
Minimum Substrate Thickness - F |
NA |
| Minimum Substrate Thickness - NFe |
NA |
| Range in Steel |
0.60-150.0 mm (0.025-6.00") |
| Resolution |
0.01 mm (.001") |
| Display |
4½ - Digit, 0.5" Backlit LCD |
| Velocity Range |
2000-10,000 m/sec. (6,500-33,000 ft./sec) |
| Probe |
7.5 MHz, 6.35 mm Diameter (0.25") |
| Cable |
1.2 m (4 ft.) waterproof cable with non-polarized, quick-disconnect connectors. Optional lengths up to 15 m (50 ft.) |
| Temp. Limits |
Ambient: -30 to 50° C (-20 to 120° F)
Material: -0 to 200° F (-20 to 100° C)
Special high temperature probes are optionally available. |
| Battery Type |
Two AA batteries |
| Battery Life |
200 hours |
| Weight |
196 g (7 ounces) |
| Size |
64 x 114 x 32 mm
(2.5 x 4.5 x 1.25") |
| Warranty |
Gauge: 5 Years
Probes: 90 Days |
| Accessories Included |
Probe/cable assembly. 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case. |
|
Model |
Description |
|
TI-25M-H |
High Temperature for surfaces up to 650° F or 343° Celsius |
|
TI-25M-107 |
Cast Iron / Plastics |
|
TI-25M-HW |
Heavy Wall (1.27-508mm) |
|
| The TI-25M is supplied as a complete kit with the gauge, probe, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST Calibration Certificate, and Operating Instruction Manual - all in a foam-fitted carrying case. |  |
| item |
Price |
Description |
In Cart |
 |
| Product(s) |
| TI-25M |
€1190.00 |
TI-25M Complete kit | | |
| TI-25M-H |
€1265.00 |
TI-25M-H Complete kit | | |
| TI-25M-HW |
€1190.00 |
TI-25M-HW Complete kit | | |
| TI-25M-107 |
€1190.00 |
TI-25M-107 Complete kit | | |
| Accessories |
| TICC-M |
€70.00 |
Protective holder | | |
| CF12 |
€20.00 |
Coupling Fluid - 12 oz | | |
| Calibration Certificate |
€99.00 |
Calibration Inspection Certificate | | |
| V-BLOCK |
€175.00 |
V-Block Transducer holder | | |
| CF-2H |
€32.50 |
Coupling Fluid for High Temperature (315 °C) 60 ml | | |
| TI-SB4 |
€105.00 |
Uncertified Steel Testblock | | |
| TI-SB-4H |
€295.00 |
Steel Test Block | | |
| TI-SB-4L |
€395.00 |
Steel Test Block | | |
| TI-SB-5L |
€295.00 |
Certified Steel Test Step Block | | |
| T-102-3300 |
€295.00 |
7.5 MHz Probe 1/4" | | |
| T-102-2000 |
€245.00 |
5 MHz Probe1/4" | | |
| T-104-1000 |
€265.00 |
1/2 inch 2.25 MHz Transducer for Cast Iron / Plastics | | |
| T-044-2000 |
€335.00 |
High Temperature Probe 1/2" 5 MHz | | |
| T-104-2000 |
€275.00 |
Heavy Wall 5.0 MHz Probe 1/2" | | |
| T-002-3300 |
€295.00 |
7.5 MHz transducer (TOP-in) | | | | |
All mentioned prices are excluding VAT |
|
Downloads
