View Larger Image
|
|
DX2
Tension meter |
Tension meter manufactured by Schmidt. Extremely accurate measurements. All meters are manufactured with the highest care.
The tensionmeter model DX2 can be used for many industrial applications. 12 Models are available with a range from 10 - 50 cN to 5 - 20 daN.
|
 Built-in material thickness
compensator improves
accuracy for changing
diameters on DX2-1000 and higher ranges | | Custom-built configurations and special calibration are available | | Filament guide and roller shifting mechanism ensure easy acquisition of the running material | | Built-in mounting holes permit fixed installation for continuous tension measurement | | Special finger support
located on the rear side
reduces the effort to move the outer roller assembly | | Ball-bearing mounted, V-grooved guide rollers |
| | Special finger support
located on the rear side
reduces the effort to move the outer roller assembly | | Each instrument is individually calibrated for highest accuracy | | 41mm Ø scale | | Specific Test Report with calibration report optionally available | | Rugged aluminium housing |
|
| Model |
Ranges | Measuring Head Width* mm | SCHMIDT Calibration Material** | MTC*** |
| DX2-50 |
5-50 cN | 66 | PA: 0.12 mm Ø | |
| DX2-120 |
20-120 cN | 66 | PA: 0.12 mm Ø | |
| DX2-200 |
20-200 cN | 66 | PA: 0.12 mm Ø | |
| DX2-400 |
20-400 cN | 66 | PA: 0.20 mm Ø | |
| DX2-1000 |
50-1000 cN | 66 | PA: 0.30 mm Ø | XX |
| DX2-2000 |
200-2000 cN | 116 | PA: 0.50 mm Ø | XX |
| DX2-5000 |
400-5000 cN | 116 | PA: 0.80 mm Ø | XX |
| DX2-8000 |
1-8 daN | 116 | PA: 1.00 mm Ø | XX |
| DX2-10K |
2.5-10 daN | 116 | PA: 1.00 mm Ø | XX |
| DX2-20K-L |
5-20 daN | 216 | PA: 1.50 mm Ø | XX | | |
Other tension ranges and measuring head widths available on request.
Other units of measure available, such as g or kg.
* Depending on model, either width of filament guide or outer distance between outside guide rollers
** Suitable for 95% of applications - PA = Polyamide Monofilament
***MTC = Material Thickness Compensator
Special calibration using customer supplied samples is recommended, if process material differs significantly from the SCHMIDT calibration material in diameter, rigidity or shape. For this purpose a material sample of about 5 m should be supplied.
|
| |
Code: Standard
Roller material:
Hardcoated aluminium
Line Speed:
2000
|
|
|
Code: T
Roller material:
Plastic (POM) black
Line Speed:
1000 |
|
|
Code: H
Roller material:
Plasma-coated aluminium
Line Speed:
5000 |
|
|
Code: U
Roller material:
Hardcoated aluminium (Radius R3)
Line Speed:
2000 |
|
|
Code: CE
Roller material:
Ceramic
Line Speed:
1000 |
|
|
Code: ST
Roller material:
Hardened steel
Line Speed:
1000 |
|
|
Code: B
Roller material:
Tempered steel for tire cord
Line Speed:
1000 |
|
|
Code: ASY
Roller material:
Hardcoated aluminium , asymmetrical groove
Line Speed:
1000 |
|
|
Code: K
Roller material:
Hardcoated aluminium
Line Speed:
3500 |
|
|
Code A: Air Damping
This adjustable mechanical air dashpot is recommended for applications in which great fluctuations of the measured tension occur, as in spooling and winding machines. This assures steady tension readings on the scale.
|
|
|
Code L: Special Lever
Facilitates acquisition of the running material when measuring high tensions. Reduces force necessary to extend outer rollers: Recommended for tension ranges of 10 daN and higher.
|
|
|
Code M: Memory Pointer
Retains the highest measured value (PEAK). Available for mechanical tension meters.
|
|
|
| Calibration: |
According to SCHMIDT factory procedure |
| Accuracy: |
±1% full scale or ±1 graduation on scale |
| Scale diameter: |
41 mm |
| Temperature range: |
10-45ºC |
| Air humidity: |
85% RH, max. |
| Housing material: |
Die-cast aluminium |
| Housing dimensions: |
188 x 85 x 45 mm (LxWxH) |
| Weight, net (gross): |
up to DX2-10K approx. 470 g (1000 g)
DX2-20K-L approx. 580 g (2000 g) |
|
|
