View Larger Image
|
|
MTM
Multi-Range Torque Tester |
The MTM Series of torque transducer provide an economical way to measure and calibrate multiple torque tools. The MTMDP models (MTMDP-2S pictured) have an integrated display for a fully integrated tester.
Historically, transducers had to be purchased individually and then connected to a display via a switch box or a group of cables. With the MTM series, this has become much easier: up to 4 transducers can be integrated in one compact housing.
There is a small footprint that allows clean, well-organized work space. This helps eliminate the endless searching for cables, adapters, and other accessories that may be needed.
The quality of this economically priced products shows in features such as independent CW and CCW calibration, multi-point linearization, metrology grade transducer shafts, and overload protection to 200% of full scale.
* MTMDP-2 coupled with an MTM-4.
NOTE: The MTM Torque Tester is not CE certified
|
 Available with 2, 3 or 4 torque transducers | | Selectable units of: Ft-lb, IN-lb, IN-oz, KGF-m, KGF-cm, GF-cm, CN-m, N-m | | Small footprint of the MTM allows for a clean, well-organized work space | | 200% Overload protection |
| | External transducers can be connected with cable input | | LED Indicator Shows Active Transducer | | Includes NIST Traceable calibration certificate with data for each transducer | | Replaceable shaft design. If one shaft is damaged, replace that shaft, not the entire unit. |
|
| Model |
Range | Drive
Size | Run-Down
Fixture |
| ITIO-10 | 0.70 - 7.06 N-cm | 1/4" | Included |
| ITIO-50 | 3.53 -35.31 N-cm | 1/4" | Included |
| ITIO-100 | 7.06 - 70.61 N-cm | 1/4" | Included |
| ITI-10 | 11.29 - 112..9 N-c | 1/4" | Included |
| ITI-25 | 28.24 - 282.4 N-cm | 1/4" | Included |
| ITI-50 | 56.5 - 565 N-cm | 1/4" | Included |
| ITI-100 | 112 - 1120 N-cm | 1/4" | Included |
| ITI-250 | 282 - 2820 N-cm | 3/8" | Included |
| ITI-500 | 565 - 5650 N-cm | 3/8" | Included |
| ITF-100 | 13.56 - 135.6 N-m | 1/2" | Optional |
| ITF-150 | 20 - 200 N-m | 1/2" | Optional |
| ITF-250 | 33- 330 N-m | 1/2" | Optional |
| ITF-600 | 81 - 810 N-m | 3/4" | Optional |
| ITF-1000 | 135 - 1350 N-m | 1" | Optional |
| ITF-2000 | 271- 2710 N-m | 1" | Optional |
| ITF-3000 | 406 - 4060 N-m | 1 1/2" | Optional |
| ITF-5000 | 677- 6770 N-m | 1 1/2" | Optional |
| |
Alternative Unit Calculator- recasts values in above table
(units in RED can be selected on gauge. Other units for reference only)
|
| Don't see the range you need? Custom ranges are available, please call us to discuss your application.
ER - Extended Range Option increases certified range to 5-100% (instead of 10-100%) |
RDF
Joint Simulators / Run Down Fixtures |  |
| | | Click image for more info
|
| Calibrated Range |
10-100% Full Scale, bi-directional (Standard) |
| Extended Range |
5-100% Full Scale, bi-directional (ER Option) |
| Accuracy |
±0.5% of indicated (within calibrated range) |
| Resolution |
4 Active Digits |
| Overload Protection |
200% Full Scale bi-directional |
| Operating Modes |
Track, Peak, 1st Peak |
| Filtering |
Selectable; 125Hz, 250Hz, 500Hz, 1000Hz, 1500Hz and 2000Hz |
| Memory |
data storage of up to 999 readings |
| Data Output |
RS-232 |
| Display |
62 x 62mm backlit LCD |
| Alarm Limits |
Panel Mounted LED for Visual Alarm Limits |
| Power |
NiMH rechargeable batteries provide 8-10 hours continuous use |
| Weight |
6-12 lbs, depends on number of transducers and configuration |
| Operating Temp |
0-50 °C (32 - 120 °F) |
| Warranty |
1 Year |
| Calibration Certificate |
Includes NIST Traceable calibration certificate with data for each transducer |
| Standard Accesories |
Joint Simulator for 1/4" & 3/8" drives, AC adapter/Charger |
| Optional Accessories |
Joint Simulators for 1/2", 3/4" & 1" Transducers, Extended Ranger "ER" Option |
All mentioned prices are excluding VAT |
|
