View Larger Image
|
|
TI-007DL
Data Logging Precision Ultrasonic Wall Thickness Gauge |
Measuring Range
0.15 - 25.4 mm
0.0060 - 1.000 inches
With the TI-007DL wall thickness gauge you can perform extremely precise and high-resolution measurements on thin-walled metal and plastics. This ultrasonic device is very suitable for use in extreme environments because of it’s robust aluminium housing which is sealed for excellent protection.
The gauge has a built-in memory for 1000 data points that can be separated into 10 separate "batches". You can download the stored data to a serial printer or PC and with no additional costs a Windows compatible data transfer program is supplied.
The TI-007DL ultrasonic wall thickness gauge has a MEASURING RANGE from 0.15 to 25.4 mm (0.0060 to 1.0000 inch). It can measure thin materials and automatically remove any coatings in ECHO-TO-ECHO MODE as well as automatically switch to interface echo mode when measuring thicker materials and plastics when using a single element delay tip transducer.
A special model with a Graphite Tip probe for measurement of plastics is also available (TI-007DL-GT).
|
 Selectable units of inch or mm | | Memory for 1000 data points in up to 10 batches | | Resolution of 0.001 inch (0.01 mm) | | Large, backlit LCD display retains last reading | | RS-232C Serial output for downloading stored data to a printer or computer |
| | Windows compatible data transfer program supplied at no additional cost | | Includes NIST Calibration Certificate | | CE Certified | | Optional model available with Graphite Tip for measuring plastics: TI-007DL-GT |
|
| TI-SB | Precision Machined and Finished Includes NIST Report and Test Data |  | | | Click image for more details
|
| TI-SB4 | Uncertified Steel Test Block For convenient confirmation of thickness gauge calibration |  | | | Click image for more details
|
| TICC-M | Constructed from heavy duty Cordura Nylon Belt loop included Includes wrist & shoulder straps |  | | | Click image for more details
|
| CF12 | Used to create an ultrasonic coupling between the probe and material to be measured 355ml (12oz) bottle |  | | | Click image for more details
|
| TI-DIN-CAL | Calibration Certificate DIN 55 350 Part 18, § 4.22, DIN ISO 8402 Part 1 |  | | | Click image for more details
|
| TI-PRINTER | Small, portable and easy to use Prints statistical data from ultrasonic wall thickness gauges with a serial (RS232) output |  | | | Click image for more details
|
| RS232-2-USB | Vivanco Serial (RS232) to USB Adapter USB to D-sub 9p male connector |  | | | Click image for more details
|
| N-306-0010 | RS232 (DB-9 to Lemo) Data Cable 182cm |  | | | Click image for more details
|
| T-402-5507 | Spare / Replacement 15 mHz Probe for TI-007 |  | | | Click image for more details
|
| Delay Line Tips | Delay Line Tips for TI-007 |  | | | Click image for more details
|
|
 |
| P/N |
Description |
Standard / Optional |
Image |
| X-231-0000 |
1/4" x 3/8"
for all metals
(Short) |
Standard |
 |
| X-241-0000 |
1/4" x 1/2"
for all metals
(Long) |
Standard |
 |
| X-633-0000 |
1/4" x 3/8"
Graphite Tip
for thin plastics |
Standard on "-GT" models |
 |
| X-532-0000 |
3/16" x 3/8"
Conical Tip
for all metals |
Optional |
 |
| X-533-0000 |
3/16" x 3/8"
Graphite Tip
for thin plastics
(Graphite Cone) |
Optional |
 |
|
|
Single Element Contact type probe can be fitted with a variety of delay line tips, depending upon the application
- Standard, small for very thin metals
- Standard, tall for thicker metals
- Conical, when smallest contact area is required
- Graphite, for plastic
|
| Range in Steel |
0.0060-1.0000" (0.15-25.40 mm) |
| Resolution |
.0001" (0.001 mm) |
| Display |
4½ - Digit, 0.5" Backlit LCD |
| Velocity Range |
2000-10.000 m/sec. (6.500-33.000 ft./sec.) |
| Transducer |
Single element with delay tip. 10 to 22 MHz frequency range. |
| Probe Wearface |
PEEK (Polyethlethylketone) |
| Cable |
1.2 m (4 ft) waterproof cable with non-polarized, quick-disconnect LEMO connectors. Optional lengths up to 30 m (100 ft.) |
| Serial Output |
RS-232C (8, N, 1, user-set baud rate) |
| Temp. Limits |
Ambient: -30 to 50° C (-20 to 120° F)
Material: -20 to 100° C (0 to 200° F) |
| Battery Type |
Two AA batteries |
| Battery Life |
150 hours |
| Weight |
300 gr |
| Size |
64 x 114 x 32 mm
(2.5 x 4.5 x 1.25") |
| Accessories Included |
Probe/cable assembly. 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case. |
| Warranty |
Gauge: 5 Years
Probes: 90 Days |
| The TI-007DL is supplied as a complete kit with the gauge, probe, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST Calibration Certificate, data transfer software, serial output cable and Operating Instruction Manual - all in a foam-fitted carrying case. |  |
| item |
Price |
Description |
In Cart |
 |
| Product(s) |
| TI-007DL |
€1735.00 |
TI-007DL Complete kit | | |
| TI-007DL-GT |
€1775.00 |
TI-007DL-GT Complete kit | | |
| Accessories |
| CF12 |
€20.00 |
Coupling Fluid - 12 oz | | |
| TICC-M |
€70.00 |
Protective holder | | |
| Calibration Certificate |
€99.00 |
Calibration Inspection Certificate | | |
| X-231-0000 |
€25.00 |
Tip for TI-007DL Standard Small | | |
| X-241-0000 |
€25.00 |
Tip for TI-007DL Standard Long | | |
| X-633-0000 |
€40.00 |
Graphite Tip for TI-007DL | | |
| X-532-0000 |
€25.00 |
Cone Tip for TI-007DL Probe | | |
| X-132-0000 |
€25.00 |
Tip for TI-007DL Small Cone | | |
| X-533-0000 |
€50.00 |
Graphite Cone Tip Delay Line Probe | | |
| RS232-2-USB |
€25.00 |
Serial (RS232) to USB Adapter | | |
| T-402-5507 |
€475.00 |
Delay Line Probe 15 MHz | | |
| TI-PRINTER |
€330.00 |
Printer for Wall Thickness Gauge | | |
| N-306-0010 |
€120.00 |
Data Cable 182cm | | |
| TI-SB4 |
€105.00 |
Uncertified Steel Testblock | | |
| TI-SB-4H |
€295.00 |
Steel Test Block | | |
| TI-SB-4L |
€395.00 |
Steel Test Block | | |
| TI-SB-5L |
€295.00 |
Certified Steel Test Step Block | | | | |
All mentioned prices are excluding VAT |
|
Downloads
