View Larger Image
|
|
TI-25DL
Data Logging Wall Thickness Gauge |
Measuring Range
0.60 - 150.0 mm
0.025 - 6.00 inches
The TI-25DL precisely measures wall thickness of all metals, ceramics, glass and most rigid plastics and the extent of corrosion - from only one side!
The gauge has a built-in memory for 1000 data points that can be separated into 10 separate "batches". You can download the stored data to a serial printer or PC and with no additional costs a Windows compatible data transfer program is supplied.
The TI-25DL has 3 measuring modes: Single Thickness Reading mode which measures the thickness on one point. The Scan mode which measures over a larger measuring area by “dragging” the probe: the minimum thickness encountered during the scan will be displayed then. The third measuring mode is the Differential mode which displays the difference ("+" or "-") from a set of "nominal" value.
|
 RS-232C Serial output for downloading stored data to a printer or computer | | Large, backlit LCD display retains last reading | | Resolution of 0.001" (0.01 mm) | | Selectable units of inch or mm | | Special-purpose probes are offered for a variety of applications |
| | Memory for 1000 data points in up to 10 batches | | Windows compatible data transfer program supplied at no additional cost | | Includes NIST Calibration Certificate | | CE Certified |
|
| The TI-25DL is supplied as a complete kit with the gauge, probe, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST Calibration Certificate, data transfer software, serial output cable and Operating Instruction Manual - all in a foam-fitted carrying case. |  |
| TI-SB | Precision Machined and Finished Includes NIST Report and Test Data |  | | | Click image for more details
|
| TI-SB4 | Uncertified Steel Test Block For convenient confirmation of thickness gauge calibration |  | | | Click image for more details
|
| TICC-M | Constructed from heavy duty Cordura Nylon Belt loop included Includes wrist & shoulder straps |  | | | Click image for more details
|
| CF12 | Used to create an ultrasonic coupling between the probe and material to be measured 12oz Bottle |  | | | Click image for more details
|
| CF2H | Temperature Range:
0° to 600° F
-18° to 315° C Supplied in 60ml (2oz) tube |  | | | Click image for more details
|
| TI-DIN-CAL | Calibration Certificate DIN 55 350 Part 18, § 4.22, DIN ISO 8402 Part 1 |  | | | Click image for more details
|
| TI-25-UW-50 | 50 Ft. Length, Waterproof Probe/Cable assembly with non-polarized, Dual-Lemo connectors. 1/2", 5 MHz Probe for wide variety of steel, stainless steel, aluminum and similar applications. |  | | | Click image for more details
|
| TI-V-BLOCK | The V-Block transducer holder offers the operator greater control and repeatabily when measuring on pipes and other curved areas.
For 3/16" & 1/4" Transducers only. |  | | | Click image for more details
|
| TI-PRINTER | Small, portable and easy to use Prints statistical data from ultrasonic wall thickness gauges with a serial (RS232) output |  | | | Click image for more details
|
| RS232-2-USB | Vivanco Serial (RS232) to USB Adapter USB to D-sub 9p male connector |  | | | Click image for more details
|
| N-306-0010 | RS232 (DB-9 to Lemo) Data Cable 182cm |  | | | Click image for more details
|
|
 |
Minimum Radius
for Convex Surfaces |
8.89 mm |
| Minimum Radius
for Concave Surfaces |
76.2 mm |
 |
Minimum Headroom |
25.4 mm |
 |
Minimum Sample
Diameter |
3.8 mm |
 |
Minimum Substrate Thickness - F |
NA |
| Minimum Substrate Thickness - NFe |
NA |
| Range in Steel |
0.025-6.00" (0.60-150.0 mm) |
| Resolution |
.001" (0.01 mm) |
| Velocity Range |
2000-10.000 m/sec. (6.500-33.000 ft./sec.) |
| Display |
4˝ - Digit, 0.5" Backlit LCD |
| Probe |
7.5 MHz, 0.25" Diameter (6.35 mm) |
| Probe Wearface |
PEEK (Polyethlethylketone) |
| Cable |
1.2 m (4 ft. ) waterproof cable with non-polarized, quick-disconnect connectors. Optional lengths up to 15 m (50 ft.). |
| Serial Output |
RS-232C (8, N, 1, user-set baud rate) |
| Temp. Limits |
Ambient: -30 to 50° C (-20 to 120° F )
Material: -20 to 100° C (0 to 200° F )
Special high temperature probes are optionally available. |
| Battery Type |
Two AA batteries |
| Battery Life |
200 hours |
| Weight |
7 ounces (196 g) |
| Size |
64 x 114 x 32mm
(2.5 x 4.5 x 1.25") |
| Accessories Included |
Probe/cable assembly. 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case. |
| Warranty |
Gauge: 5 Years
Probes: 90 Days |
|
Model |
Description |
|
TI-25M-H |
High Temperature for surfaces up to 650° F or 343° Celsius |
|
TI-25M-107 |
Cast Iron / Plastics |
|
TI-25M-HW |
Heavy Wall (1.27-508mm) |
|
| item |
Price |
Description |
In Cart |
 |
| Product(s) |
| TI-25DL |
€1499.00 |
TI-25DL Complete kit | | |
| TI-25DL-H |
€1575.00 |
TI-25DL-H Complete kit | | |
| TI-25DL-HW |
€1499.00 |
TI-25DL-HW Complete kit | | |
| TI-25DL-107 |
€1499.00 |
TI-25DL-107 Complete Kit | | |
| Accessories |
| TICC-M |
€70.00 |
Protective holder | | |
| CF12 |
€20.00 |
Coupling Fluid - 12 oz | | |
| Calibration Certificate |
€99.00 |
Calibration Inspection Certificate | | | | |
All mentioned prices are excluding VAT
|
|
Downloads
