View Larger Image
|
|
DTX2
Cap Torque Tester |
Imada’s cap torque tester offers programmable high/low setpoints for go/no-go testing. ORANGE lights up for measurements less than Low setpoint, GREEN for between High and Low setpoint, and RED for over High setpoint.
Store up to 1000 values in memory, which can be transmitted using the serial output. Use the real time mode to display torque transients, or peak mode to capture the peak torque achieved during a test. Selectable measuring units of lbf-in, kgf-cm, or N-cm.
Cap testers include AC adapter/charger and built-in NiCad rechargeable batteries, 1" high standard pegs (optional long pegs available).
|
 Display of opening or close torque | | Selectable units: Nm, kgfm, Lb.in | | Clambs containers from 30 to 180 mm diameter | | Storage of 960 values, which can be displayed or downloaded to a PC |
| Selectable Modes
Real Time: (to display load transients)
Peak: (to capture the peak torque achieved during a test) | | High internal sampling rate | | Programmable high/low setpoints for go/no-go testing with color-coded indicators in the display | | Output (RS232C, analog and Mitutoyo Digimatic) |
|
| Model |
Capacity lbf/in | Kgf/m | N/cm |
| DTX2-15B |
15.00 (0.01) | 20.00 (0.01) | 200.0 (0.1) |
| DTX2-40B |
40.00 ( 0.01) | 50.00 (0.01) | 500.0 (0.1) |
| DTX2-85B |
85.0 ( 0.1) | 100.0 ( 0.1) | 1000 (1) | | |
| CB-104 | Connecting cables analog for connection to a line recorder. Connecting cable for series DPZ, DPZS, DPZH, DTX and HTG. |  | | | Click image for more details
|
| CB-204 | Connection cables for RS-232C for connection to PC Sub D9 female for series DPZ, DPZS, DPZH, DTX and HTG. |  | | | Click image for more details
|
| CB-304 | Digimatic connecting cables for connecting to Mitutoyo evaluation units. For series DPZ, DPZS, DPZH, DTX and HTG |  | | | Click image for more details
|
|
| Accuracy: |
± 0.5% Full scale ± 1 digit |
| Measuring frequency: |
30 times/s |
| Selectable units: |
Nm, kgfm, Lb.in |
| Overload capacity: |
150% Full scale (flashing LED beyond 108% Full scale),
open collector output signal |
| Zero adjustment: |
10% Full scale |
| A/D Converter: |
16 bit |
| Memory: |
non-volatile, recall up to 960 loads, recall both peaks, open and close torque |
| Setpoints: |
Min, Max (programmable), with output signal |
| Output signal: |
RS232C (8,1,N,19200), analog ± 2V DC, Open collector 4x (+NG, Ok, -NG, OVL), max. 30V DC, 10mA, Mitutoyo Digimatic |
| Temperature range: |
5 - 45°C |
| Air humidity: |
85% RH, max. |
| Power supply: |
DTXA: 100V ... 240V AC, 50Hz
DTXB: Rechargeable NiCd battery pack (approx. 8 hours continuous use) and / or 230 V AC adapter |
| Housing dimensions: (approx.) |
324x210x130 mm (LxWxH) |
| Weight, net (gross): |
DTXA: ca. 4900 g (ca. 5900g)
DTXB: ca. 4600g (ca. 5600g) |
| item |
Price |
Description |
In Cart |
 |
| Product(s) |
| DTX2-15B |
€1940.00 |
DTX2-15B Complete kit | | |
| DTX2-40B |
€1940.00 |
DTX2-40B Complete kit | | |
| DTX2-85B |
€1940.00 |
DTX2-85B Complete kit | | | | |
|
|
