View Larger Image
|
|
HTG2
Digital Torque Gauge with programmable setpoints |
Model HTG2 digital torque gauge offers programmable high/low setpoints for go/no-go testing. ORANGE lights up for torque measurements less than Low setpoint, GREEN for between High and Low setpoint, and RED for over High setpoint.
Store up to 1,000 values in memory, which can be displayed or transmitted using serial output. Use the real time mode to display torque transients, or the peak mode to capture the peak torque achieved during a test. Selectable measuring units of lbf-in, kgf-cm, or N-cm.
HTG2 torque gauges are sold in kits which include the torque gauge, sensor, six foot cable, and AC adapter/charger. Built-in NI-MH rechargeable batteries.
|
 Ergonomic design with non-slip rubber grip, heavy duty metal construction | | Selectable units: Pounds, Kilograms or Newtons | | Storage of 1000 values, which can be recalled or downloaded to a PC | | Overload capacity 200% of F.S. | Two selectable modes:
Real time: To display load transients
Peak Modes: To capture the peak force achieved during test | | Overload alarm and output signal | | RS-232C, Digimatic and Analog outputs |
| | Runs on internal NI-MH batteries or AC adapter | | Both clockwise and counterclockwise operation | | Tare function | | Includes NIST-Traceable Calibration Certificate | | 2 Year Warranty | | ISO/IEC 17025 Long-form Certificate & Test Data is optionally available |
|
| Model |
Range | Resolution |
| HTG2-4 | 70.00 ozf-in | 0.01 oz-in |
| | 5.000 kg-cm | 0.001 Kg-cm |
| | 50.00 N-cm | 0.01 N-cm |
| HTG2-15 | 15.00 lbf-in | 0.01 lb-in |
| | 20.00 Kg-cm | 0.01 Kg-cm |
| | 200.0 N-cm | 0.1 N-cm |
| HTG2-40 | 40.00 lbf-in | 0.01 lb-in |
| | 50.00 Kg-cm | 0.01 Kg-cm |
| | 500.0 N-cm | 0.1 N-cm |
| HTG2-85 | 85.00 lbf-in | 0.1 lb-in |
| | 100.0 Kg-cm | 0.1 Kg-cm |
| | 1000 N-cm | 1 N-cm |
| |
Alternative Unit Calculator- recasts values in above table
(units in RED can be selected on gauge. Other units for reference only)
|
|
Chuck Sizes |
|
Model |
Standard |
Optional (*L) |
|
HTG2-4 |
4mm / 0.160" |
NA |
|
HTG2-15 |
6.5mm / 0.260" |
13mm / 0.512" |
|
HTG2-40 |
6.5mm / 0.260" |
13mm / 0.512" |
|
HTG2-85 |
6.5mm / 0.260" |
13mm / 0.512" |
|
*For 13mm Chuck add "-L" to
part # ie: HTG2-15L |
|
Min/Max Sample
Diameters |
|
Chuck Size |
Min Sample |
Max Sample |
|
4mm / 0.160" |
0.3mm / 0.012" |
4mm / 0.160" |
|
6.5mm / 0.260" |
0.5mm / 0.020" |
6.5mm / 0.260" |
|
13mm / 0.512" |
0.7mm / 0.028" |
13mm / 0.512" |
|
Delivery includes
Torque meter with 1 sensor and pin chuck (standard Model TA-00), connecting cable 2m long, manual and manufacturer's calibration report |  |
SW-1
Data Acquisition Software for Force Gauges & Torque Gauges |  |
 Full SPC and graphing capabilities
Automates your data collection Provides a running log of all measurements along with a chart of the data as well as statistical information | | | Click image for more info
|
MGT
Digital Torque Gauge |  |
Remote sensor | | | Click image for more info
|
DID-4
Digital Torque Screwdriver |  |
Peak, Real Time and Peak Down measuring mode (selectable) Both CW and CCW ratchett and fixed operation 800 data memory for recall or for SPC download Runs on internal NiCad batteries (for 8 hours) Auto shut-off after 10 min. of non-use | | | Click image for more info
|
| Accuracy: |
± 0.5 % Full scale ± 1 digit |
| Measuring frequency: |
30 times/s |
| Selectable units: |
Pounds, Kilograms or Newtons |
| Display: |
4 digit, 14 mm high |
| Overload capacity: |
200 % Full scale (flashing LED beyond 108% full scale) open collector output signal |
| Zero adjustment: |
10% Full scale |
| A/D converter: |
16 bit |
| Memory: |
non-volatile, recall up to 960 loads, recall both peaks, open and close torque |
| Setpoints: |
Min, Max (programmable), with output signal |
| Output signal: |
RS232C (8,1,N,19200), analog ± 2V DC, Open collector 4x (+NG, Ok, -NG, OVL), max. 30V DC, 10mA, Mitutoyo Digimatic |
| Temperature range: |
5 - 45`C |
| Air humidity: |
85% RH, max. |
| Power supply: |
Rechargeable NiCd battery pack (approx. 8 hours continuous use) and/or 230 V AC adapter |
| Housing dimensions: (approx.) |
Display unit:220x78x32mm (LxBxH)
Sensor: 150x39mm (lxdiam.) |
| Weight: (approx.) |
Display unit: 440g / Sensor: 530 g
Complete set: 2000 g |
| Warranty: |
2 years |
| item |
Price |
Description |
In Cart |
 |
| Product(s) |
| HTG2-4 | €1495.00 | HTG2-4 Digital Torque Tester (Jacobs Chuck) (70oz-in, 4 mm Chuck) | | |
| HTG2-40 | €1310.00 | HTG2-40 Digital Torque Tester (40 lb-in, 6.5 mm chuck) | | |
| HTG2-85 | €1310.00 | HTG2-85 Digital Torque Tester (Jacobs Chuck) (85 lb-in, 6.5 mm chuck) | | |
| HTG2-15 | €1310.00 | HTG2-15 Digital Torque Tester (15 lb-in, 6.5 mm Chuck) | | |
| HTG2-15L | €1410.00 | HTG2-15L Digital Torque Tester (Jacobs Chuck) (15 lb-in, 13 mm Chuck) | | |
| HTG2-40L | €1410.00 | HTG2-40L Digital Torque Tester (Jacobs Chuck) (40 lb-in, 13 mm Chuck) | | |
| HTG2-85L | €1410.00 | HTG2-85L Digital Torque Tester (Jacobs Chuck) (85 lb-in, 13 mm Chuck) | | |
| Accessories |
| SW-1X | €190.00 | Data Transfer and Analysis Software | | |
| CB-204 | €75.00 | RS232 Serial Output Cable with Sub D 9 plug | | |
| ISO-17025 | €155.00 | ISO/IEC 17025 Long-form Certificate & Test Data | | | | |
All mentioned prices are excluding VAT |
|
