View Larger Image
|
|
RTSX
Rotary Torque Transducer |
For use with most hand tools, power tools or rotational measurement applications.
Connects between the power tool and the joint. Monitors actual torque being applied from the driver to the fastener.
Features an instant auto-recognition system of the RTSX connected to the PTT & LTT.
|
 Use with most hand tools, power tools or rotational measurement applications. | | Accuracy +/-.25% of full scale. |
| | Connects between the power tool and the joint. Monitors actual torque being applied from the driver to the fastener. | | Bi-directional. |
|
| Model |
Range | Input Drive | Output Drive |
| RTSX10i-H | 1 - 10 Lb-in | 1/4" M/Hex | 1/4" F/Hex |
| RTSX10i | 1 - 10 Lb-in | 1/4" F/Sq | 1/4" M/Sq |
| RTSX50i-H | 5 - 50 lbf.in | 1/4" M/Hex | 1/4" F/Hex |
| RTSX50i | 5 - 50 lbf.in | 1/4" F/Sq | 1/4" M/Sq |
| RTSX100i-H | 10 - 100 Lb-in | 1/4" M/Hex | 1/4" F/Hex |
| RTSX100i | 10 - 100 Lb-in | 1/4" F/Sq | 1/4" M/Sq |
| RTSX200i-H | 20 - 200 Lb-in | 1/4" M/Hex | 1/4" F/Hex |
| RTSX200i | 20 - 200 Lb-in | 3/8" F/Sq | 3/8" M/Sq |
| RTSX50F | 5 - 50 Lb-ft | 3/8" F/Sq | 3/8" M/Sq |
| RTSX100F | 10 - 100 Lb-ft | 1/2" F/Sq | 1/2" M/Sq |
| RTSX400F | 40 - 400 Lb-ft | 3/4" F/Sq | 3/4" M/Sq |
| RTSX738F | 74 - 738 Lb-ft | 1" F/Sq | 1" M/Sq |
| RTSX1500F | 150 - 1500 Lb-ft | 1 1/2" F/Sq | 1 1/2" M/Sq |
| |
Alternative Unit Calculator- recasts values in above table
(units in RED can be selected on gauge. Other units for reference only)
|
PTT
Torque Analyzer |  |
 System Accuracy +/- 0.5% of reading from 20% to 100% of full scale
Selection of six operating modes: Track, Peak, First Peak, Audit, Torque + Angle, and Tool Test. | | | Click image for more info
|
LTT
Torque and Angle Analyzer with USB Output |  |
Accuracy +/- 0.5% of reading from 20% to 100% of full scale.
Provides “EZ-Plug & Play.” Features an instant auto-recognition system of the transducer connected to the LTT. | | | Click image for more info
|
| Output at Rated Capacity |
> 6 Nm [53 lbf.in] rated torque 2 mV/V |
| Interchanegeability |
Matched for mv/v and shunt calibration +0.3% FS |
| Nonlinearity |
+0.2% FS |
| Excitation Recommended |
10V DC or AC RMS |
| Bridge Resistance |
350 ohms |
| Usable Temperature Range |
41-122 degrees F |
| Safe Overload |
125% of rated output |
|
|
