View Larger Image
|
|
TI-007DL
Data Logging Precision Ultrasonic Wall Thickness Gauge |
Measuring Range
0.0060 - 1.000 inches
0.15 - 25.4 mm
The TI-007DL is a precision ultrasonic wall thickness gauge specifically suited to make extremely precise and high-resolution measurements on thin-walled metal and plastics. It is packaged in a sturdy extruded aluminum housing which is sealed for excellent environmental protection assuring trouble-free use even in the toughest field and production environments.
The TI-007DL incorporates a built-in memory for 1000 data points that can be separated into 10 separate "batches." The stored data can be downloaded to a serial printer or a personal computer. A Windows compatible data transfer program is supplied at no additional cost.
The gauges have a MEASURING RANGE from 0.0060 to 1.0000 inch, (0.15 to 25.40 mm). Using a single element delay tip transducer, the gauges will measure thin materials and automatically remove any coatings in ECHO-TO-ECHO MODE as well as automatically switch to interface echo mode when measuring thicker materials and plastics. |
 Selectable units of inch or mm | | Memory for 1000 data points in up to 10 batches | | Resolution of 0.001 inch (0.01 mm) |
| | Large, backlit LCD display retains last reading | | RS-232C Serial output for downloading stored data to a printer or computer | | Windows compatible data transfer program supplied at no additional cost |
|
| The TI-007DL is supplied as a complete kit with the gauge, probe, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST Calibration Certificate, data transfer software, serial output cable and Operating Instruction Manual - all in a foam-fitted carrying case. |  |
| TI-SB | Precision Machined and Finished Includes NIST Report and Test Data |  | | | Click image for more details
|
| TI-SB4 | Uncertified Steel Test Block |  | | | Click image for more details
|
| TICC-M | Constructed from heavy duty Cordura Nylon Belt loop included Includes wrist & shoulder straps |  | | | Click image for more details
|
| CF12 | Used to create an ultrasonic coupling between the probe and material to be measured 12oz Bottle |  | | | Click image for more details
|
| TI-DIN-CAL | Calibration Certificate DIN 55 350 Part 18, § 4.22, DIN ISO 8402 Part 1 |  | | | Click image for more details
|
| TI-PRINTER | Small, portable and easy to use Prints statistical data from ultrasonic wall thickness gauges with a serial (RS232) output |  | | | Click image for more details
|
| RS232-2-USB | Vivanco Serial (RS232) to USB Adapter USB to D-sub 9p male connector |  | | | Click image for more details
|
| N-306-0010 | RS232 (DB-9 to Lemo) Data Cable 182cm |  | | | Click image for more details
|
| T-402-5507 | Spare / Replacement 15 mHz Probe for TI-007 |  | | | Click image for more details
|
| Delay Line Tips | Delay Line Tips for TI-007 |  | | | Click image for more details
|
|
|
Single Element Contact type probe can be fitted with a variety of delay line tips, depending upon the application
- Standard, small for very thin metals
- Standard, tall for thicker metals
- Conical, when smallest contact area is required
- Graphite, for plastic
|
| P/N |
Description |
Standard / Optional |
Image |
| X-231-0000 |
1/4" x 3/8"
for all metals
(Short) |
Standard |
 |
| X-241-0000 |
1/4" x 1/2"
for all metals
(Long) |
Standard |
 |
| X-633-0000 |
1/4" x 3/8"
Graphite Tip
for thin plastics |
Standard on "-GT" models |
 |
| X-532-0000 |
3/16" x 3/8"
Conical Tip
for all metals |
Optional |
 |
|
| Range in Steel |
0.0060-1.0000" (0.15-25.40 mm) |
| Resolution |
.0001" (0.001 mm) |
| Display |
4½ - Digit, 0.5" Backlit LCD |
| Velocity Range |
6,500-33,000 ft./sec (2000-10,000 m/sec.) |
| Transducer |
Single element with delay tip. 10 to 22 MHz frequency range. |
| Probe Wearface |
PEEK (Polyethlethylketone) |
| Cable |
4 ft. (1.2 m) waterproof cable with non-polarized, quick-disconnect LEMO connectors. Optional lengths up to 100 ft. (30 m) |
| Serial Output |
RS-232C (8, N, 1, user-set baud rate) |
| Temp. Limits |
Ambient: -20 to 120° F (-30 to 50° C)
Material: 0 to 200° F (-20 to 100° C) |
| Battery Type |
Two AA batteries |
| Battery Life |
200 hours |
| Weight |
7 ounces (196 g) |
| Size |
2.5 x 4.5 x 1.25"
(64 x 114 x 32 mm) |
| Accessories Included |
Probe/cable assembly. 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case. |
| Warranty |
Gauge: 5 Years
Probes: 90 Days |
| item |
Price |
Description |
In Cart |
 |
| Product(s) |
| TI-007DL |
€1735.00 |
TI-007DL Complete kit | | |
| TI-007DL-GT |
€1775.00 |
TI-007DL-GT Complete kit | | |
| Accessories |
| CF12 |
€20.00 |
Coupling Fluid - 12 oz | | |
| TICC-M |
€70.00 |
Protective holder | | |
| Calibration Certificate |
€99.00 |
Calibration Certificate | | | | |
|
|
Downloads
