View Larger Image
|
|
TI-25DL-MMX
Data Logging Through Paint Ultrasonic Wall Thickness Gauge |
Pulse-Echo Mode (Pit & Flaw Detection) measures from 0.025 to 19.999 inches (0.63 to 500 millimeters).
Echo-Echo Mode (Through Paint & Coatings) measures from 0.1 to 1 inch (2.54 to 25.4 millimeters).
The TI-25DL-MMX Wall Thickness Gauge accurately measures wall thickness and the extent of corrosion of all metals, ceramics, glass and most rigid plastics - from only one side!
The TI-25DL-MMX can be used in a Single Thickness Reading mode or in a Scan mode , where the probe is dragged over a large measuring area. The minimum thickness reading recorded during the "scan" will be displayed.
The TI-25DL-MMX incorporates a built-in memory for 1000 data points that can be separated into 10 separate "batches." The stored data can be downloaded to a serial printer or a personal computer. A Windows compatible data transfer program is supplied at no additional cost.
The TI-25DL-MMX probe is waterproof and can be submerged in water. The gauge is impact-resistant and environmentally sealed to provide trouble-free operation under the toughest field conditions. |
 Resolution of 0.001 inch (0.01 mm) | | Simple operator controls virtually eliminate training | | Ability to measure through paint and eliminate coatings | | Large, backlit LCD display retains last reading | | RS-232C Serial output for downloading stored data to a printer or computer |
| | Special-purpose probes are offered for a variety of applications | | Memory for 1000 data points in up to 10 batches | | CE Certified | | Switch-selected units for inches or mm | | For underwater surveying, probe cable lengths up to 50 feet are optionally |
|
| The TI-25DL-MMX is supplied as a complete kit with the gauge, probe, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST Calibration Certificate, data transfer software, serial output cable and Operating Instruction Manual - all in a foam-fitted carrying case. |  |
| TI-SB | Precision Machined and Finished Includes NIST Report and Test Data |  | | | Click image for more details
|
| TI-SB4 | Uncertified Steel Test Block |  | | | Click image for more details
|
| TICC-M | Constructed from heavy duty Cordura Nylon Belt loop included Includes wrist & shoulder straps |  | | | Click image for more details
|
| CF12 | Used to create an ultrasonic coupling between the probe and material to be measured 12oz Bottle |  | | | Click image for more details
|
| TI-DIN-CAL | Calibration Certificate DIN 55 350 Part 18, § 4.22, DIN ISO 8402 Part 1 |  | | | Click image for more details
|
| TI-V-BLOCK | The V-Block transducer holder offers the operator greater control and repeatabily when measuring on pipes and other curved areas.
For 3/16" & 1/4" Transducers only. |  | | | Click image for more details
|
| TI-PRINTER | Small, portable and easy to use Prints statistical data from ultrasonic wall thickness gauges with a serial (RS232) output |  | | | Click image for more details
|
| RS232-2-USB | Vivanco Serial (RS232) to USB Adapter USB to D-sub 9p male connector |  | | | Click image for more details
|
| N-306-0010 | RS232 (DB-9 to Lemo) Data Cable 182cm |  | | | Click image for more details
|
|
|
Selection Guide - Pit
& Flaw Detection (Pulse-Echo) Mode |
|
Model
Number |
Maximum Coating |
Minimum Wall |
Maximum
Wall |
|
All Models |
0.020" (0.50mm) |
0.100" (2.54mm) |
6.000"
(152.4mm) |
|
Selection Guide -
Thru-Paint (Echo-Echo) Model |
|
Model
Number |
Maximum Coating |
Minimum Wall |
Maximum
Wall |
|
TI-25DL-MMX |
0.040" (1.00mm) |
0.100" (2.54mm) |
1.000"
(25.4mm) |
|
TI-25DL-MMX-EXT |
0.080" (2.00mm) |
0.200" (5.08mm) |
5.000"
(127.0mm) |
|
 |
| Range |
Pulse-Echo Mode (Pit & Flaw Detection) measures from 0.025 to 19.999 inches (0.63 to 500 millimeters)
Echo-Echo Mode (Through Paint & Coatings) measures from 0.1 to 1 inch (2.54 to 25.4 millimeters) |
| Resolution |
.001" (0.01 mm) |
| Display |
4½ - Digit, 0.5" Backlit LCD |
| Velocity Range |
0.0492 to .3937 in./µs. (1250 to 10,000 meters/second) |
| Probe |
5 MHz, 0.25" Diameter (6.35 mm) |
| Probe Wearface |
PEEK (Polyethlethylketone) |
| Cable |
4 ft. (1.2 m) waterproof cable with non-polarized, quick-disconnect connectors. Optional lengths up to 50 ft. (15 m). |
| Temp. Limits |
Ambient: -20 to 120° F (-30 to 50° C)
Material: 0 to 200° F (-20 to 100° C)
Special high temperature probes are optionally available |
| Serial Output |
RS-232C (8, N, 1, user-set baud rate) |
| Battery Type |
Two AA batteries |
| Battery Life |
200 hours |
| Weight |
7 ounces (196 g) |
| Size |
2.5 x 4.5 x 1.25"
(64 x 114 x 32 mm) |
| Accessories Included |
Probe/cable assembly. 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case. |
| Warranty |
Gauge: 5 Years
Probes: 90 Days |
| item |
Price |
Description |
In Cart |
 |
| Product(s) |
| TI-25DL-MMX |
€1575.00 |
TI-25DL-MMX Complete kit | | |
| TI-25DL-MMX-EXT |
€1575.00 |
TI-25DL-MMX-EXT Complete Kit | | |
| Accessories |
| TICC-M |
€70.00 |
Protective holder | | |
| CF12 |
€20.00 |
Coupling Fluid - 12 oz | | |
| Calibration Certificate |
€99.00 |
Calibration Certificate | | | | |
|
|
Downloads
