View Larger Image
|
|
TI-25M
Ultrasonic Wall Thickness Gauge |
Measuring Range
0.025 - 6.00 inches
0.60 - 150.0 mm
The new CHECK-LINE TI-25M Wall Thickness Gauge accurately measures wall thickness and the extent of corrosion of all metals, ceramics, glass and most rigid plastics - from only one side!
The TI-25M can be used in a Single Thickness Reading mode or in a Scan mode , where the probe is dragged over a large measuring area. The minimum thickness reading recorded during the "scan" will be displayed.
The TI-25M probe is waterproof and can be submerged in water. The gauge is impact-resistant and environmentally sealed to provide trouble-free operation under the toughest field conditions.
|
 CE Certified | | Simple operator controls virtually eliminate training | | Resolution of 0.001 inch (0.01 mm) | | Large, backlit LCD display retains last reading |
| | Special-purpose probes are offered for a variety of applications | | Switch-selected units for inches or mm | | For underwater surveying, probe cable lengths up to 50 feet are optionally |
|
| The TI-25M is supplied as a complete kit with the gauge, probe, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST Calibration Certificate, and Operating Instruction Manual - all in a foam-fitted carrying case. |  |
| TI-SB | Precision Machined and Finished Includes NIST Report and Test Data |  | | | Click image for more details
|
| TI-SB4 | Uncertified Steel Test Block |  | | | Click image for more details
|
| TICC-M | Constructed from heavy duty Cordura Nylon Belt loop included Includes wrist & shoulder straps |  | | | Click image for more details
|
| CF12 | Used to create an ultrasonic coupling between the probe and material to be measured 12oz Bottle |  | | | Click image for more details
|
| CF2H | Temperature Range:
0° to 600° F
-18° to 315° C Supplied in 60ml (2oz) tube |  | | | Click image for more details
|
| TI-25-UW-50 | 50 Ft. Length, Waterproof Probe/Cable assembly with non-polarized, Dual-Lemo connectors. 1/2", 5 MHz Probe for wide variety of steel, stainless steel, aluminum and similar applications. |  | | | Click image for more details
|
| TI-DIN-CAL | Calibration Certificate DIN 55 350 Part 18, § 4.22, DIN ISO 8402 Part 1 |  | | | Click image for more details
|
| TI-V-BLOCK | The V-Block transducer holder offers the operator greater control and repeatabily when measuring on pipes and other curved areas.
For 3/16" & 1/4" Transducers only. |  | | | Click image for more details
|
|
| Range in Steel |
0.60-150.0 mm (0.025-6.00") |
| Resolution |
0.01 mm (.001") |
| Display |
4½ - Digit, 0.5" Backlit LCD |
| Velocity Range |
2000-10,000 m/sec. (6,500-33,000 ft./sec) |
| Probe |
7.5 MHz, 6.35 mm Diameter (0.25") |
| Cable |
1.2 m (4 ft.) waterproof cable with non-polarized, quick-disconnect connectors. Optional lengths up to 15 m (50 ft.) |
| Temp. Limits |
Ambient: -30 to 50° C (-20 to 120° F)
Material: -0 to 200° F (-20 to 100° C
Special high temperature probes are optionally available. |
| Battery Type |
Two AA batteries |
| Battery Life |
200 hours |
| Weight |
196 g (7 ounces) |
| Size |
64 x 114 x 32 mm
(2.5 x 4.5 x 1.25") |
| Accessories Included |
Probe/cable assembly. 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case. |
| Warranty |
Gauge: 5 Years
Probes: 90 Days |
|
Model |
Description |
|
TI-25M-H |
High Temperature for surfaces up to 650° F or 343° Celsius |
|
TI-25M-107 |
Cast Iron / Plastics |
|
TI-25M-HW |
Heavy Wall (1.27-508mm) |
|
| item |
Price |
Description |
In Cart |
 |
| Product(s) |
| TI-25M |
€1190.00 |
TI-25M Complete kit | | |
| TI-25M-H |
€1265.00 |
TI-25M-H Complete kit | | |
| TI-25M-HW |
€1190.00 |
TI-25M-HW Complete kit | | |
| Accessories |
| TICC-M |
€70.00 |
Protective holder | | |
| CF12 |
€20.00 |
Coupling Fluid - 12 oz | | |
| Calibration Certificate |
€99.00 |
Calibration Certificate | | |
| V-BLOCK |
€175.00 |
V-Block Transducer holder | | |
| CF-2H |
€32.50 |
Coupling Fluid for High Temperature (315 °C) 60 ml | | | | |
|
|
Downloads
