View Larger Image
|
|
DX2-EDM
Wire EDM Tension Meter |
Manufactures of wire-EDM machines recommend checking the erosion wire tension once a week. Depending on the machine type as well as the wire material and diameter, the measured tension should lie between 50 and 3000 g.
The correct erosion wire tension reduces wire oscillation and guarantees a pinpoint accuracy of your machines. Always check the tension in calibration mode on the moving wire. Make sure the generator is switched off for the tension check.
|
 Easy to operate | | Special finger support
located on the rear side
reduces the effort to move
the outer roller assembly | | Ball-bearing mounted, V-grooved guide rollers | | 41mm Ø scale | | Specific Test Report with calibration report optionally available |
| | Roller shifting mechanism ensure easy acquisition of the running material | Everything in operator's view:
- the guide rollers
- the measured material
- the readings | | Each instrument is individually calibrated for highest accuracy | | Rugged aluminium housing |
|
| Model |
Ranges cN | Measuring Head | SCHMIDT Calibration | Wire Guide |
| DX2-2000-EDM |
50-2000 | 91 | PA: 0.30 mm Ø | no |
| DX2-3000-EDM |
100-3000 | 91 | PA: 0.30 mm Ø | no |
| DX2-4000-EDM |
200-4000 | 116 | PA: 0.30 mm Ø | yes | | |
Other tension ranges and measuring head widths available on request.
Other units of measure available, such as g.
* Depending on model, either width of wire guide or outer distance between outside guide rollers
** Suitable for 95% of applications - PA = Polyamide Monofilament
Special calibration using customer supplied samples is recommended, if process material differs significantly from the SCHMIDT calibration material in diameter, rigidity or shape. For this purpose a material sample of about 5 m should be supplied.
|
| |
Code: Standard
Roller material:
Hardcoated aluminium
Line Speed:
2000
|
|
|
Code: CE
Roller material:
Ceramic
Line Speed:
1000 |
|
|
Delivery includes:
Tension meter with carrying case, operating instructions in English or German as requested |  |
| Calibration: |
According to SCHMIDT factory procedure |
| Accuracy: |
±1% full scale or ±1 graduation on scale |
| Scale diameter: |
41 mm |
| Temperature range: |
10-45ºC |
| Air humidity: |
85% RH, max. |
| Housing material: |
Die-cast aluminium |
| Housing dimensions: |
188 x 85 x 45 mm (LxWxH) |
| Weight, net (gross): |
approx. 470 g (1000 g) |
|
|
