View Larger Image
|
|
TI-PVX
Precision Ultrasonic A-scan Wall Thickness Gauge |
The TI-PVX Precision Ultrasonic Wall thickness gauge gives the user the necessary flexibility for both high resolution and penetration requirements.
It is the perfect tool for very precise and delicate measurements. This is due to the ability of the TI-PVX to use a variety of single element transducers for specific applications. These are: Standard Delay Line (acrylic and graphite tips for metals and thin plastics), Pencil Delay Line (tough access area on thin materials), and Contact transducers (variety of applications).
There are different viewing options available like RF waveform, +/- Rectified waveform, and Large Digits with Scan Bar.
Additional there is the time based B-Scan feature which displays a cross section of the test material and can display the profile of the opposite surface of the material.
Another available feature is the high speed scan function which speeds up the inspection process (32 measurements per second). With this feature the user can scan a larger area in a relatively short period of time. After the transducer is removed from the test material, the minimum thickness measured will appear on the display.
|
 Multiple calibration options: One Point, Two Point, or selection from a Material List. | | 16 factory setups and 48 user-defined setups. User defined setups can be edited for custom applications. | | Hardware AGC gain control for multiple echo and thru-paint measurement. | | The TI-PVX is equipped with an alpha-numeric data logger to provide increased versatility for those custom reporting needs. | | The high speed scan feature | | Visual and audible alarm with hi and lo limit settings for specific application tolerances. | | Adjustable resolution settings |
| | Auto find features locates the detection point(s) and adjusts the display settings to bring the waveform into view. | | The TI-PVX comes complete with our Windows® PC software for transferring data to and from a PC. | | 2 year limited warranty
| | CE Certified | | Includes NIST traceable calibration certificate | | 1/4" 15MHz Delay Line Probe p/n T-481-5507 also available when pencil probe is not needed. Specify TI-PVX-5507 to order as complete kit with this probe |
|
| TI-SB | Precision Machined and Finished Includes NIST Report and Test Data |  | | | Click image for more details
|
| TI-SB4 | Uncertified Steel Test Block For convenient confirmation of thickness gauge calibration |  | | | Click image for more details
|
| TICC-MVX | Constructed from heavy duty Cordura Nylon Built-in belt loop Includes wrist & shoulder straps |  | | | Click image for more details
|
| CF12 | Used to create an ultrasonic coupling between the probe and material to be measured 12oz Bottle |  | | | Click image for more details
|
| TI-DIN-CAL | Calibration Certificate DIN 55 350 Part 18, § 4.22, DIN ISO 8402 Part 1 |  | | | Click image for more details
|
| TI-PRINTER | Small, portable and easy to use Prints statistical data from ultrasonic wall thickness gauges with a serial (RS232) output |  | | | Click image for more details
|
| RS232-2-USB | Vivanco Serial (RS232) to USB Adapter USB to D-sub 9p male connector |  | | | Click image for more details
|
| N-306-0010 | RS232 (DB-9 to Lemo) Data Cable 182cm |  | | | Click image for more details
|
|
| Range: |
Interface-Echo Mode:
Steel 1.27mm - 25.4mm (0.05 - 1.0 in). Plastics from 0.127mm (.005in.).
Echo-Echo Mode:
Steel 0.15mm - 12.7mm (.006in -.500in).
Pulse-Echo Contact Mode:
Steel 1mm - 254mm (.040in - 10.0in). Plastics from 0.254mm (.010in).
Echo-Echo Contact mode:
Steel thru-paint 2.54mm - 76.2mm (.100in - 3.0in). |
| Resolution: |
(selectable) +/- 0.01 mm (.001in), or +/- 0.001mm (.0001in). |
| Velocity Range: |
.0492 to .3936 in./ms
1250 to 9999 meters/sec |
| Units: |
English & Metric |
| Memory: |
16 megabit non-volatile ram. |
| Data Logger: |
12.000 readings and waveforms (alpha numeric storage). |
| Display: |
1/8 in. VGA grayscale display |
| Setups: |
16 factory and 48 user-defined setups. |
| Display Views: |
A-Scan:
Rectified +/- (half wave view) RF (full waveform view)
B-Scan:
Time based cross section view. Display speed of 15 secs per screen.
Large Digits:Standard thickness view. Digit Height: 10mm (0.400 in).
Scan Bar:
6 readings per second. Viewable in B-Scan and Large Digit views.
Repeatability Bar Graph:
Bar graph indicates stability of reading. |
| Power Source: |
Three 1.5V alkaline or 1.2V NiCad AA cells |
| Battery Life: |
Typically operates for 150 hours on alkaline and 100 hours on NiCad |
| Power off: |
Auto power off if idle 5 min. |
| Operating Temperature: |
-10° to 60°C (-14° to 140°F). |
| Size: |
63.5 W x 165 H x 31.5 D mm (2.5 W x 6.5 H x 1.24 D inches). |
| Weight: |
0.4 kg (0.9 lbs ) |
| Warranty: |
Gauge: 2 Years
Probe: 90 Days |
| The TI-PVX is supplied as a complete kit with the gauge and pencil probe, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST Calibration Certificate, data transfer software, serial output cable and Operating Instruction Manual - all in a foam-fitted carrying case. |  |
| item |
Price |
Description |
In Cart |
 |
| Product(s) |
| TI-PVX |
€2595.00 |
TI-PVX Complete Kit | | |
| Accessories |
| CF-12 |
€20.00 |
Coupling Fluid - 340g | | |
| Calibration Certificate |
€99.00 |
Calibration Inspection Certificate | | |
| TICC-MVX |
€85.00 |
Protective holder for MVX | | |
| TI-PRINTER |
€330.00 |
Printer for Wall Thickness Gauge | | |
| RS232-2-USB |
€25.00 |
Serial (RS232) to USB Adapter | | |
| N-306-0010 |
€120.00 |
Data Cable 182cm | | |
| X-152-0000 |
€55.00 |
1/16" Delay Line Tip for Pencil Probe | | |
| X-752-0000 |
€55.00 |
1/8"Dia. x .450 Delay Tip for Pencil Probe | | |
| TI-SB4 |
€105.00 |
Uncertified Steel Testblock | | |
| TI-SB-4H |
€295.00 |
Steel Test Block | | |
| TI-SB-4L |
€395.00 |
Steel Test Block | | |
| TI-SB-5L |
€295.00 |
Certified Steel Test Step Block | | | | |
All mentioned prices are excluding VAT |
|
Downloads
